Media Vision Fusion CD16

Jumper Settings

Card Type	Sound card
Chipset Controller	Unidentified
I/O Options	CD-ROM audio in, CD-ROM interface, game/MIDI port (2), line in, microphone in, speaker out
Maximum DRAM	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
4-pin connector	CN1	Line in	J1
16-pin CD-ROM interface	CN2	Speaker out	J2
CD-ROM - audio in	CN3	Mic in	J3
Game/MIDI port	CN4

INTERRUPT SELECTION
IRQ		J14
»	3	Pins 7 & 8 closed
	4	Pins 5 & 6 closed
	5	Pins 3 & 4 closed
	6	Pins 1 & 2 closed

BASE I/O ADDRESS SELECTION
Address		J15
»	340h	Pins 1 & 3, 2 & 4 closed
	300h	Pins 3 & 5, 4 & 6 closed
	310h	Pins 1 & 3, 4 & 6 closed
	330h	Pins 3 & 5, 2 & 4 closed

Jumper Settings Rev. D (650-0032-01)

Card Type	Sound card
Chip Set	Unidentified
Maximum Onboard Memory	Unidentified
I/O Options	Game/MIDI port, audio in (2), CD-interface, microphone in, stereo line in, stereo line out, PC speaker connector
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
Game/MIDI port	CN1	PC speaker connector	J4
Microphone in	CN2	Audio in - CD-ROM	J5
Stereo line out	CN3	Aux. Audio in - CD-ROM	J13
Stereo line in	CN4	CD-ROM interface (Sony)	J14

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	J9	Unidentified

BOARD ID SELECTION
Setting		J2/pins 1 & 2	J2/pins 3 & 4	J2/pins 5 & 6
»	0	Open	Open	Open
	1	Closed	Open	Open
	2	Open	Closed	Open
	3	Closed	Closed	Open
	4	Open	Open	Closed
Note: When ID 4 is selected, the base I/O address is forced to 388h. For all other ID’s the software scans for available settings. Refer to the manufacturer’s documentation for possible settings.

See Also

• Media Vision