Mitsubishi 800

From Higher Intellect Wiki
Jump to: navigation, search



==============================================================================
                              RELEASED ON 06/20/93
==============================================================================
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:::::::: ____ : ____ : _ :::: _ :::::::::: _ : _ : ____ : _ :::: _ :::::::::::
::::::: |    | | ___| | | :: | | :::::::: | | | | | ___| | | :: | | ::::::::::
::::::: | ||_| |  _|  | | :: | | ::: ___  | |_| | |  _|  | | :: | | ::::::::::
::::::: | | _  | | .: | | :: | | :: |___| |  _  | | | .: | | :: | | ::::::::::
::::::: | || | | |__  | |__  | |__        | | | | | |__  | |__  | |__ ::::::::
::::::: |____| |____| |____| |____| ::::: |_| |_| |____| |____| |____| :::::::
::::::::.    .:.    .:.    .:.    .:::::::. .:. .:.    .:.    .:.    .::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
::::::::::::THE:DIRECTORY:OF:CELLULAR:MODIFICATION:::MITSUBISHI:800:::::::::::
:::::::::::::...:.........:..:........:............:::..........:...::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
==============================================================================
                WRITTEN, CREATED, AND TESTED BY VIDEO VINDICATOR
==============================================================================


INTRODUCTION
~~~~~~~~~~~~
  Here it is... The long awaited first file on cellular modification... Not
just some bullshit that tells you how to reprogram the NAM, but the down and
dirty ripping of the ESN.  This is the first in what should (and hopefully)
will be a neverending series of files from me on some of out happy cellular
manufactures fine (and not so fine) products.

  In the interests of keeping health and happy, this modification was
completely test on 10 test humans, who said they had no problems, except a
large growth located behind their left ear... Cellular phones causing
cancer?  Ya right, I think my toilet puts out more harmful (and the key word
is harmful) radiation then a fucking 0.5 watt handheld.  And shit, even if
it does, I'll still use 'em.

    This file deals with the general layout of the Mistubishi 800, as well
as includes the binary for a generic tumbling modification, which will be
covered later in the file.


WHAT YOU'LL FIND INSIDE
~~~~~~~~~~~~~~~~~~~~~~~
  The Mitsubishi has got to be one of the best phones out there to modify,
since it requires only the most minimum permanent modification to occur, and
NO soldering on the PC Boards themselves!

  The ESN is located on what I have refered to as Board C in the first
diagram below.  This chip was manufactured by CSI and is a 93C64K.  One easy
way in which to modify this peticular phone would be to replace it with a
ZIFF socket, and an EEPROM (or preferably a flash prom) which would contain
the new ESN.

  The software chip is locates on the underside of Board A, and is a
standard 27C256 (32K) software EPROM.  For the sake of compatability, I have
included the binary source to the version I preformed this modification on
(and there are several other revisions out there!).  To replace it, simply
choose a EEPROM that is faster than 25ns (I would recommend a 15), and if
you plan on tampering with the software at all, then get flash proms.  Make
sure that the chip you program has the proper checksum, which is E1A5, and
for your own information this is revision CB6.

  The phone uses a Mitsubishi proprietary processor, the M50747, which was
discontinued this year, and replaced by the M38000.  This is a Motorol
68HC11 compatible chip, and does not have any special instructions AS FAR AS
I KNOW. If you are interested in modifying it, there are quite a few PD
cross-assemblers out there, although I have only seen a very few copyrighted
programs.


DISASSEMBLING THE PHONE
~~~~~~~~~~~~~~~~~~~~~~~
  Unlike what most people would like you to believe, this is probably on of
the easiest modifications to do, requiring very little soldering.  The only
tools required to remove the boards from the Mitsu 800 are a small flathead
screwdriver, a small phillips, and a set of Allen wrenches.  Here we go...

(1) Remove the handset and cradel/battery from the main phone component.
(2) Remove the three allen head screws from the main body, and then gently
    pry the top off with the screwdriver.
(3) Remove the four phillips screws from Board B (refer to diagram), and
    unplug all of the exposed antenni relays, as well as all of the wire
    connections.
(4) Gently pry the board up with the screwdriver, making sure to keep the
    board level (so as not to bend the pins connecting board B to A.
(5) Remove the antenni lead from the metal casing surrounding Board D, and
    then unscrew board C.
(6) Remove the EPROM from the underside of Board A with the screwdriver.
    It is installed in a tower and requires no soldering (how thoughtful
    of them).

That's it, the unit is as disassembled as we need.


THE BOARD LAYOUT
~~~~~~~~~~~~~~~~
  Here is the top view of the phones' boards, and the screw locations.  This
is 1/3 scale on a NEC 4D.


             .----CONNECTED-----.  BOARD C
             |                  |   ___
             |     BOARD A      |  |  o|                LEGEND
        ___  |  _____________   |  |###|                ~~~~~~
       / O |___|             |  |                       # - Wire connect
      |     ###    o        o|  |____|                  : - Drop Pins
      |                      |                          o - Screw for Board
      |               (1)   O|                          O - Case screw
      |           ___________|                          1 - Processor
      |          |_                      BOARD B
      |           :|                   ____________
      |   o       :| <--CONNECTED-.   |o           |
      |           :|              |   |:       o   |
      |           :|              `-> |:           |
      |          |                    |:           |
      |         _|                    |:   o       |
      |       #|                      |            |
      |       #| <-----.              |            |
      |   o   #|_      |              |            |
      |____      |     |              |            |
          ~| # O |     |              |            |
      .--> |_#___|     |              |            |
      |                |              |            |
      |             CONNECTS          |    o      o|
   CONNECTS         TO BOARD D        |            |
   TO POWER         (NOT SHOWN)       |____________|
   INPUT

General Information on the Boards involved

BOARD A - The Main board, controls all the other boards in the phone.  All
          antenni relays and power controls are present here.  The Software
          EPROM is also on this board.  Battery and NAM functions also
          reside here.

BOARD B - Controls all recieve functions, and also tone synthesis for
          reverse channels.  Tone crystal is located on board A  Antenni
          loops from Board D.

BOARD C - This board only contains the ESN.

BOARD D - Controls all transmit functions, and also the D/A conversion
          process. Antenni Loops from board A.


BOARD A REVERSE SIDE CLOSEUP
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         LEGEND
         ~~~~~~
         + - Inputs from Board B
         s - Crystal for subaudible tones
         c - Crystal for Touchtones
         O - Case Screw
         o - Screw for Board                 ___________________
         Z - Input for Handset              |O           o  ZZZZ|
         Y - Handsfree/Horn Hookup          |          BBB  ZZZZ|
         X - Power Hookup                   |          BBB   YYY|
         C - Software EPROM                 |                YYY|
         B - Battery                        |CCCCCCCCCC s    YYY|
         H - TDK Heatsinks                  |>CCCCCCCCC s   XXXX|
                              ___________   |CCCCCCCCCC     XXXX|
         _________        ___|+++++++++++|__|           o   XXXX|
        |O        |______|                                      |
        |                                                       |
        |                                                      _|
        |                                                     |
        |____                                ccc              |
             |_ o                    o                        |_
               |                                                |
               | HHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHH             O|
               |_HHHHHHHHHHHHHHHH_HHHHHHHHHHHHHHHH_____________/


BOARD C CLOSEUP
~~~~~~~~~~~~~~~
  This is the main board that we will be concerned with in the modification,
since this is the primary piece modified.  On the
Facing down diagram, the '%' represent the ESN IC,
which is identified above.  The '.'s represent       W1 Y1 Y2 Y3 Y4 Y5
solder spots... Now one thing that is interesting,   :  :  :  :  :  :
if you notice on the facing up side, there is a      :  :  :  :  :  :
':' between two of the solder spots.  This is their  :  :  :  :  :  :
Security fuse... Wow, real                           :  :  :  :  :  :
secure.  The easiest way     FACING DOWN             :  :  :  :  :  :
to bypass this (or      ____________________       __################__
any you might come     |  .  .  .  .  .  .  |     |  ################  |
across that are the    |                    |     |  . . . .  . . . .  |
same layout), is to    |  | | | |   | | | | |     |               :    |
simply find out the    |  %%%%%%%           |     |  ` ` ` `  ` `.` `. |
pinout assignments,    |  %%%%%%%   | | | | |     |                .   |
and then connect the   |  | | | |           |     |                    |
appropriate pins into  |          .   /~~\  |     |  /~~\   .          |
your EPROM reader (Or  |  . . . . .   \__/  |     |  \__/   . . . . .  |
use a logic probe that |____________________|     |____________________|
will creat an IBM
formatted disk which is then read).               FACING UP / CONNECTS TO A
I will hopfully have another mod for this same
phone, using a very similar setup that connects to the HP 95LX and uses it
as a real-time psydo-prom (one of the advantages of my operating system for
the HP).


REPROGRAMMING THE NAM
~~~~~~~~~~~~~~~~~~~~~
  The Mitsu 800 is like all of the Mitsu family, and can be reprogrammed an
unlimited amount of times through the handset.  Although this procedure has
been outlined elsewhere, I will go into a little more detail about what
exactly each option means.

  To enter programming mode, power up the unit, and hold the (STO)re button
down, while entering '5474432'.  Release (STO)re and it should display the
following information; remember, press SEND to move to the next option:


 OPTIONS         DISPLAY     DESCRIPTION
---------------|-----------|---------------------------------------------
 0/1             DUAL        Dual number mark (0 = Single / 1 = Dual)
 (xxx)xxx-xxxx   NO1         10 Digit Mobile phone number
 xxxxxx          SID1        6 Digit Station ID Number (Odd [A] / Even [B])
 0/1             LU1         Local use mark (Preregistration 0 = Disabled
                             1 = Enabled)
 0/1             MIN MARK    Min Mark
 0333/0334       IPCH        Paging Channel (0333 = A / 0334 = B)
 00-15           ACCOLC      Access Overload Class
 0/1             PS1         Prefered System for First phone number
 00-15           GI1         GIM Mark for First phone number
 xxxx            SECURITY    Security code to lock/unload phone
 0/1             EE          Use DTMF (0 = External / 1 = Internal)
 0/1             DT          Discontinuous Transmittion
 0/1             HF          Horn Alert (0 = On / 1 = Off)
 0/1             INHIBIT     Roam Inhibit (0 = Able to Roam / 1 = Unable)
 0/1             C TONE      Continuous DTMF Tones (0 = Enable / 1 = Disable)
 0/1             SYS A/B     System A or B selection (0 = A / 1 = B)
 0/1             DUAL HS     Dual Handsets (0 = Disabled / 1 = Enabled)
 0/1             INHIBIT LD  Inhibit Long Distance (0 = LD / 1 = No LD)
---------------|-----------|---------------------------------------------

  To exit the programming mode, and store the changes, press END.  The phone
will then reset and display all of it's information.


THE IMFAMOUS 800 MOD
~~~~~~~~~~~~~~~~~~~~
    This peticular mod is unlike most, since the eprom is a 27C256 and has
little remaining room in it.  Also, Mitsubishi scattered their software
throughout the prom as well, making it even more difficult.

    The software for this mod is located in the following hex locations:

                            7236H to 7490H
                            7500H to 7CF1H
                            7D65H to 7EFFH

    There are also pointer reassignments at the following hex locations:

        0D0DH       130DH       185AH       285FH       2CCDH
                    4C4FH       4E37H       6B2CH

    Now on to the actually workings of the modification.  Installation is
simple, just replace the existing software eprom with the new modified one,
and then close the phone back up.  Make sure to reconnect ALL of the antenni
leads, since if you do not, you will have problems.

    This peticular mod is just the basic roamers scam, which means the phone
is registered to the local systems (usually the B side) as an out-of-state
cellular.  Then, due to the roamers agreement most of the carriers adhear
to, it allows you to make overseas, long distance, local, 950, and 800
(pretty much the whole 9 yards) calls without validation.  Now, validation
is processed once the call is initiated, but they will not normally
disconnect you when it is discovered.  If you get a message which states
"Welcome to Cellular One", "Cellular service to this phone has been
temporarily disconnected.", or "Sorry, this number is not registered", then
simply attempt a new number set.  If you happen to live in an area that is
not 'roam-able' (such as CA, TX, or IL), then you will more than likely only
be allowed to make local, 950, and 800 calls.  If you happen to a connection
country (Mexico or Canada), you will be allowed to make country-wide calls,
800, and connecting state calls (i.e. In Canada to Montana, or Mexico to
Texas).  Here's how to active the mod...

    Power up the phone, and then enter the NAM programming mode, then
proceed to press [SEND] until you reach the phone number location.  Enter an
OUT OF STATE phone number, and then valid cellular prefix... The last four
digits are not important, and may remain fixed.  Next progress to the ACCOLC
(Access Over load Class), which is the first part of the tumbled ESN
(described later).  Set this field to 00, and then add one to it every time
the phone gets deactivated. When you reach 15, set it back to 00 and change
the security.  The last portion of this mod which needs to be changed is the
SECURITY, which should be set to a number ending with either an 8, 9, or 0.
Here is the ratio of changes:

                        First to change:

    ACCESS      6 beeps     Change up to 15 times to avoid "service
                            suspended" message with 01 through 15
                            (Change 100% of the time)

                        Second to change:

    SECURITY    9 beeps     Change after no ACCESS changes work, to avoid
                            "welcome to","sorry unregistered" etc messages
                            with any 4 digits with 3,5,8,9 or 0 at the end.
                            (Change about 60% of the time)

                        Third to change:

    NUMBER      1 beep      Change after no SECURITY changes work with
                            one of the above valid area code and prefix
                            numbers with any last 4 digits.
                            (Change about 30% of the time)

                        Last to change:

    AREA CODE/PREFIX        Change after no NUMBER changes work
                            (Change about 10% of the time)

    I would recommend the following settings for use with either the A or
the B systems:


            DISPLAY     A SETTINGS          B SETTINGS
           -----------|-------------------|------------------
            DUAL        0                   0
            no1         Use list for A      Use list for B
            Sid1        00027/00019         00002/00034
            LU1         1                   1
            E1          1                   1
            IPCH1       0333                0334
            ACCoLC1     00-15               00-15
            PS1         1                   0
            G11         10                  10 or 12
            SECURITY    0008-9999           0008-9999 (end with 8 or 9)
            EE          1                   1
            dt          0                   0
            HF          1                   1
            InHIbIt     0                   0
            C tone      1                   1
            SyS Ab      1                   1
            dUAL HS     0                   0
            InHIbIt Ld  0                   0
           -----------|-------------------|------------------


WHAT THE CELLSITE SEES
~~~~~~~~~~~~~~~~~~~~~~
    This will give you an idea of what exactly you are doing when you change
any of the information in the NAM programming area.  Using this table, it
would even be feasible to use this phone, like a clone, by simply entering
in the ESN in the tables method, and then entering the corresponding phone
number. The full 8 digit hexidecimal ESN is controlled solely by the ACCOLC
and SECURITY in the program.  No other data revealed on the DDI is
transmitted.

    SECURITY IS SET ON 1238 AND REMAINS UNCHANGED (positions 4,5,8 & 1)

             ESN             ACCOLC  NOTES
             ~~~             ~~~~~~  ~~~~~
             1 23 45 67 8    xx      1-8 ESN Digit Positions
             - -- -- -- -    --
             8 1F 12 00 3    00      As ACCOLC is changed note pos 6&7 and
             8 20 12 01 3    01      2&3 change as pos 1,4,5,8 remain the
             8 21 12 02 3    02      same.
             8 22 12 03 3    03
             8 23 12 04 3    04
             8 24 12 05 3    05
             8 25 12 06 3    06
             8 26 12 07 3    07
             8 27 12 08 3    08
             8 28 12 09 3    09
             8 29 12 0A 3    10
             8 2A 12 0B 3    11
             8 2B 12 0C 3    12
             8 2C 12 0D 3    13
             8 2D 12 0E 3    14
             8 2E 12 0F 3    15

    Note while security only affects positions 4,5,8 & 1 respectively the
changing of the ACCOLC 00-15 changes not only its positions 6 and 7 into its
hexedecimal equivalents but also steps in sequence positions 2 and 3 through
1F-2E to correspond to 00-15.

        ESN DIGIT POSITIONS:

    MFR:    1   DIGIT 4 OF SECURITY         CAN ONLY BE NUMBERS 8,9 OR 0.
            2   CHANGED BY ACCOLC           POSITIONS 2&3 TOGETHER 1F-2E
    SN:     3   CHANGED BY ACCOLC           POSITIONS 2&3 TOGETHER 1F-2E
            4   DIGIT 1 OF SECURITY         CAN BE ANY NUMBER
            5   DIGIT 2 OF SECURITY         CAN BE ANY NUMBER
            6   DIGIT 1 OF ACCOLC           POSITIONS 6&7 ACCEPT ONLY 00-15
            7   DIGIT 2 OF ACCOLC           POSITIONS 6&7 ACCEPT ONLY 00-15
            8   DIGIT 3 OF SECURITY         CAN BE ANY NUMBER

    Security with the following last digit gives the following responses due
to the fact that the first 2 digits are the manufacturers code and a
non-valid mfr code yields an improper registration.

        1,2,3,4,5,6,7       "SORRY NOT PROPERLY REGISTERED FOR SERVICE"
        0,8,9               CONNECTION ALLOWED

    The following DDI reverse channel log is with the phone number set to
(617) 571-4590, and Access Overload set to 01, and the Security set to 7418:

                    ----- Mobile Request ------
                    SAT=2
                    Continuous, 25 Mhz BW
                    571-4590 (617) Page
                    MFR: 82  SN: 074011  (2181513233)
                        130      475153
                    Dialing: 80055512
                    Dialing: 12

    This should give you a good idea of how the phone could easily be used
in a clone-type method, although it would have signifigant limits.


MIT800.EXE: THE PROGRAM
~~~~~~~~~~~~~~~~~~~~~~~
    The executable included along with this will allow you to enter and ESN,
and then test it for validity in the mod.  If it is valid, it will show you
the proper settings to make the phone.  To use this, simply select option
'1', and then enter the HEX ESN, like 82A92128 (8 chars long), and press
return.  The program will process the data, and output the appropriate
response.

    Although this version does not support the DDI scan utility, what it
will allow you to do is enter a DDI log file, and then the program will
search through all the reverse channel data and redirect all valid NAM/ESN
pairs to a designated file.  This is especially convienient due to the
limits set upon the ESN generation.

    If anyone out there is using something other than the DDI box to recieve
reverse channel, contact me and I'll make an import filter for that systems
capture file structure as well.


PHONE SPECIFICATIONS
~~~~~~~~~~~~~~~~~~~~
  For those who are interested in making more modifications for this very
versatil phone, here are the TR/RX and power specs:

    Frequency Channel       824.040 - 848.970 Transmitter
                            869.040 - 893.970 Receiver
    Number of Channels      832
    Spacing                 30 kHz

    Power Supply            13.7 VDC +/- 20%

    Standby Drain           90 mA Approx.
    Transmit Mode at Max    1350 mA Approx.

    Battery Capacity        Standby         Transmit        Transmit
        1400 mAh                            Max RF          Min RF
                            15 Hours        55 Minutes      90 Minutes
    Charge Time             5 Hours
    Battery Operating Temp  0 to +40 C
              Storage Temp  -30 to +70 C

    Power Output            3 Watt @ BNC Connector
                            50 ohm impedance
    Power Control           8 levels 4 db Apart
        WATTS
        LEVEL   0       1       2       3       4       5       6       7
        [High]  4.7     1.9     .760    .300    .120    .048    .019    .008
        [Norm]  3.0     1.2     .480    .190    .076    .030    .012    .005
        [Low]   1.2      .480   .190    .076    .030    .012    .005    .003

        dBm
        LEVEL   0       1       2       3       4       5       6       7
        [High]  36.8    32.8    28.8    24.8    20.8    16.8    12.8    8.8
        [Norm]  34.8    30.8    26.8    22.8    18.8    14.8    10.8    6.8
        [Low]   30.8    26.8    22.8    18.8    14.8    10.8     6.8    2.8

    Spuriout Output         -48 dBc

    Adjacent Channel Power  -25 dB
    Frequency Stability     +/- 2.5 PPM
    Audio Distortion        -26 dB (5%)
    FM Hum & Noise          -32 dB
    Voice Modulation        300 - 3000 Hz
            Compressor      2:1 CCITT
            Pre-Empasis     +6 dB per Octave
    Deviation Voice         +/- 10.8 kHz +/- 10%

    Ch. Switching Time      20 ms adjacent channel
                            40 ms non-adjacent channel
    Data encoding           10 kb/s Manchester
    SAT Transponsding       5970, 6000, 6030 Hz +/- 1 Hz
        Phase Error         +/- 20 Degrees Maximum
        Setting Time        250 ms
        Measuring Time      250 ms
    DTMF Encoder            95 +/- 5ms Tone, Fixed
         Interdigit Time    65 +/- 5ms Minimum
         Voice              Suppressed during DTMF


PIN ASSIGNMENTS FOR HANDSET
~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Here are the Pin assignments for the handset, so you can build your own
RJ-11 interface and skip paying the money-loving cellular companies for one.
They are fairly straightforward, and if you were successful modifying the
phone, this should pose little difficulty.

    NAME        PIN  IN/OUT    SIGNAL TYPE   DESCRIPTION
   ------------|---|---------|-------------|------------------------------
    RX Audio +   1   OUT       AF            Balanced 10K ohms
    RX Audio -   2   OUT       AF            Balanced 10K ohms
    TX Audio     3   IN        AF            Unbalanced 10K ohms
    Ground       4   N/A       N/A           N/A
    HS-Outdata   5   OUT       LOGIC         Serial output data to handset
    HS-Indata    6   IN        LOGIC         Serial input data from handset
    HS-Power     7   N/A       N/A           13.7VDC Handset power
    HS-Off Sns   8   IN        N/A           ON/OFF Sensativity
   ------------|---|---------|-------------|------------------------------

    I would say that the easiest way in which to figure this out is to
connect power to pin 7, then splice into 3, and merge 1/2 to a second line
out.  Then take a logic probe, and connect leads to 5 and 6, and monitor the
interaction between the unit and handset, since this is where the [SEND] and
[END] will be transmitted.  Then it would be feasible to make an interface
for the serial port (the second port), to trigger the send and end, and
interface this with a war dialer, etc... Just convienient for those
unobtrusive scans.


OTHER MODIFICATION SOLUTIONS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    One other option for all those out there who many or many not want to
modify the operating software of the phone is Spy Supplies cellular mod
software.  They sell a package that lets you modify the MIN and ESN of about
75% of the phones that are out (like all the Motorolas, etc).  One nice
thing about this is that it actually changes what the phones ESN is, unlike
a software mod, in which it simply redirects the phone to look elsewhere it.

    The package sells for around $500, and if you mention say that I sent
you he'll knock $50 off of that.  This is DEFINANTLY a nice choice for those
who do not wish to invest the time and money into modifing the peticular
software, and this is an easy option to cloning.  Of course, he only sells
it so you can reprogram one of your other phones to share the same pair,
thus eliminating the second bill and just combining the two... And of course
that's all we intend to do with it, right?  He doesn't accept credit cards,
so don't even think about it (hehehe), and at that price, it's well worth it
and will pay for itself in less than a month if used wisely.

    The software is fairly simple and menu driven, altogether totally around
400k.  The package then includes diagrams (I believe he might actually have
pre made cables available now) to build the interface cables.  The all the
user does is plug the phone in, run the program, enter the data, and wala!
You're cloned.

    Spy Supply can be reached at 617-327-7272, 9am-5pm (ET) Monday thru
Friday. The book he sells is also interesting, although most of the
information contained within it is already available in other files.


CONCLUSION
~~~~~~~~~~
  Be watching for my own 'CONSUMER REPORTS' file, which will let you in on
just how good the name brands stock up in modification, which are pitifly
easy to modify, and which can hold up through the test of time.  Remember, I
do not take any paid advertising, and am completely unbiased.

  One shocking bit of news... I finally have an internet address, and FTP
site! Can you imaging that?  And just who was crazy enough to give me one...
None other than those wacky guys at cDc.  Just reach me at
'videov@zero.cypher.com', or in the 'vindicator' ftp directory.

  If you have any questions or comments concering this file, then you can
(as always, and yet never) leave them to be on the systems below.  If you
fucked up you phone while doing this, then you're about the most pitiful
thing in the world, since you don't have to do anything PERMINANT to the
phone!  As always, I would like to extend greetings out to my faithful
criminals:

            DYNASTAR            EREKOSE         DIGITAL HITLER
            MR DRUNKFUX         BOOTLEGGER      GRANDMASTER RATTE
            CAPT ZAP            FUNKY MONKEY    BRUJJO
            KLUDGE              GATSBY          MAXIMUM OVERDRIVE

blah blah blah...  Be watching for the return of Scantronics... Yah, that's
right, Kludge and the boys are back, and still running on a '286 (Just goes
to show you, hacking doesn't pay, but fraud does).  And I would also like to
thank the demon lord Satan, without whom life would not be possible, and not
worth living; may the living and the dead hold his name forever in torment.
And always remember...

     The Surgeon General warns that using cellulars may cause cancer;
Ya, right, along with sex, drugs, and about 5,000,000,000 other fun things.
=============================================================================
Scantronics     [  ... it's coming, it's coming ...        ] 96  619-???-????
Demon Roach     [PW: THRASH - NUP: FEAR - cDc - Nuff said  ] 24  806-794-4362
Phunline        [Extensive Satellite/Virii Sections        ] 96  916-481-2306
The Stash       [My European Connection... Lots of files   ] 96 46-498-222113
Reverse Channel [Drunkfux's Board - cDc - uXu - dFx - HoHo ] 96  713-468-5802
=============================================================================
  This concludes another wonderful file by Video Vindicator  (C)opyright 1993
=============================================================================


Share your opinion