Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
Shuttle MAD16 Pro Sound Card
Jumper Settings (w/Vol. Control)[edit]
Card Type |
Sound card |
Chipset Controller |
Unidentified |
I/O Options |
CD-ROM audio in (3), CD-ROM interface (3), game/MIDI port, IDE (AT) interface, line in, microphone in, speaker/line out, synthesis connector (2), volume, wavetable connector |
Maximum DRAM |
N/A |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Game/MIDI port |
CN1 |
Mitsumi CD - audio in |
CN9 |
Mitsumi CD-ROM interface |
CN2 |
Panasonic CD - audio in |
CN10 |
Sony CD-ROM interface |
CN3 |
Wavetable connector |
CN11 |
Panasonic CD-ROM interface |
CN4 |
Speaker/line out |
J1 |
40-pin IDE (AT) interface |
CN5 |
Line in |
J2 |
4-pin daughter board connector |
CN6 |
Mic in |
J3 |
24-pin daughter board connector |
CN7 |
Volume |
VR1 |
Sony CD - audio in |
CN8 |
CD-ROM INTERFACE SELECTION | |
Type |
JP1 |
Sony/Mitsumi/Panasonic drives |
Pins 1 & 2 closed |
IDE (AT) drive |
Pins 2 & 3 closed |
FM SYNTHESIZER CONFIGURATION | |
Setting |
JP2 |
On-board OPL3 |
Closed |
Extended OPL4 |
Open |
Note: FM synthesis is only upgradable when the Yamaha OPL4 daughter board is installed. |
VOLUME CONTROL CONFIGURATION | ||
Setting |
JP3 |
JP4 |
Enabled |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
Disabled |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
Jumper Settings (wo/Vol. Control)[edit]
Card Type |
Sound card |
Chipset Controller |
Unidentified |
I/O Options |
CD-ROM audio in (3), CD-ROM interface (3), game/MIDI port, IDE (AT) interface, line in, line out, microphone in, speaker out, synthesis connector (2), wavetable connector |
Maximum DRAM |
N/A |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Game/MIDI port |
CN1 |
Mitsumi CD - audio in |
CN9 |
Mitsumi CD-ROM interface |
CN2 |
Panasonic CD - audio in |
CN10 |
Sony CD-ROM interface |
CN3 |
Wavetable connector |
CN11 |
Panasonic CD-ROM interface |
CN4 |
Speaker out |
J1 |
40-pin IDE (AT) interface |
CN5 |
Line out |
J2 |
4-pin daughter board connector |
CN6 |
Line in |
J3 |
24-pin daughter board connector |
CN7 |
Mic in |
J4 |
Sony CD - audio in |
CN8 |
CD-ROM INTERFACE SELECTION | |
Type |
JP1 |
Sony/Mitsumi/Panasonic drives |
Pins 1 & 2 closed |
IDE (AT) drive |
Pins 2 & 3 closed |
FM SYNTHESIZER CONFIGURATION | |
Setting |
JP2 |
On-board OPL3 |
Closed |
Extended OPL4 |
Open |
Note: FM synthesis is only upgradable when the Yamaha OPL4 daughter board is installed. |