Line 1: |
Line 1: |
| [[File:SGI_Tezro.jpg|thumb|SGI Tezro]] | | [[File:SGI_Tezro.jpg|thumb|SGI Tezro]] |
| + | |
| + | [[Image:tezro-front-1.jpg|thumb|right|A Tezro from the front]] |
| + | The '''SGI Tezro''' is the second most recently released (as of December 2005) series of high-end computer workstation available from [[Silicon Graphics|SGI]], and is the immediate successor to the [[SGI Octane]] line. The systems are available in both rack-mount and tower versions, and the series was released in June 2003 with a list price of $20,500. The Tezro was released alongside the [[SGI Onyx4]] (and because of component sharing, the Onyx4 and rack-mountable Tezro share many components, including skins). The rackmount system consists of either 1 or 2 2U modules. |
| + | |
| + | Both tower and rack-mountable systems marked the return of the original 'cube' logo to SGI machines, which was welcomed by the loyal user base. |
| + | |
| + | [[Image:tezro-front-2.jpg|thumb|right|A Tezro head on]] |
| + | |
| + | == Architecture == |
| + | Similar to other SGI systems, the Tezro uses a non-blocking crossbar interconnect to connect all subsystems together. |
| + | |
| + | [[ARCS]] is provided as the boot firmware, similar to all contemporary SGI computer systems. |
| + | |
| + | |
| + | [[Image:tezro-inside-3.jpg|thumb|right|Inside a Tezro]] |
| + | |
| + | |
| + | [[Image:tezro-inside-2.jpg|thumb|right|Inside a Tezro]] |
| + | |
| + | |
| + | == Processors == |
| + | Tezro systems including either one, two or four 64-bit R16000 CPUs (in multiprocessor configurations) are available in both rack-mount and tower systems. Available MIPS R16000 CPU configurations include single, dual or quad 700MHz or 800MHz with 4MB L2 cache, and dual or quad 1GHz with 16MB L2 cache. |
| + | |
| + | == Memory Subsystem == |
| + | |
| + | Memory in the Tezro is organized into four banks of two DIMMs for the "tower" or deskside package, and eight banks of two DIMMs for the rackmount version. This results in a memory capacity from 512 MBytes to 8 Gbytes total system memory for the tower, and 0.5 to 16GB for the rackmount version. The DIMMS used are compatible with those used in the [[Origin 3000]], [[Origin 300]], and [[Origin 350]]. |
| + | |
| + | {{:Origin 3000 Memory}} |
| + | |
| + | == Graphics == |
| + | [[Image:tezro.jpg|thumb|right|A Tezro in the wild]] |
| + | |
| + | The high-end [[SGI_VPro|Odyssey]] graphics adapter, V12, is the only graphics configuration available. |
| + | |
| + | Dual head (twin V12 cards, not DCD) are available only in rackmount configurations consisting of 2 modules. Dual head operation is not possible on the 1 GHz CPU models due to the height of the CPU heatsinks making it impossible to install the V12 in the 2U chassis. When the 1 GHz CPU node is installed, the V12 must be installed in the Workstation Expansion Enclosure. |
| + | |
| + | Dual head in Tezro towers is not possible, because the system requires more power than the tower Tezro is capable of delivering.<ref>{{cite web | url=http://forums.nekochan.net/viewtopic.php?p=7334013#p7334013 | title=Re: Dual Heads on Tezro tower}}</ref> |
| + | |
| + | == Audio == |
| + | Tower systems ship with analogue audio output as standard, while PCI cards provide audio capabilities (including 2-channel 24-bit AES and 8-channel ADAT connectors) on rack-mountable versions. |
| + | |
| + | == Expansion == |
| + | The number of available 64-bit PCI slots included in a Tezro system depend upon the number of CPUs installed in the system: |
| + | |
| + | * 7 133/100MHz slots in two- or four-CPU tower systems |
| + | * 3 133/100MHz slots in single-CPU tower systems |
| + | * 6 100MHz slots and one 66MHz slot in 4U rackmountable systems |
| + | * 2 100MHz slots and one 66MHz slot in 2U rackmountable systems. |
| + | |
| + | All PCI slots in each Tezro model are 3.3V card slots. |
| + | |
| + | A single U160 SCSI connector is available for attaching external peripherals, as is an optional [[FireWire]] card. |
| + | |
| + | == Operating System == |
| + | The only operating system produced for the Tezro is SGI's [[IRIX]]. |
| + | |
| + | |
| + | == Example hinv and L1 controller output == |
| + | |
| + | |
| + | <pre> |
| + | |
| + | hinv -vm |
| + | Location: /hw/module/001c01/node |
| + | IP53_2CPU Board: barcode MZY208 part 030-1869-001 rev -C |
| + | Location: /hw/module/001c01/IXbrick/xtalk/11 |
| + | WS_INT_53 Board: barcode NAA339 part 030-1881-006 rev -A |
| + | Location: /hw/module/001c01/IXbrick/xtalk/12 |
| + | ODY128B1_2 Board: barcode NTX598 part 030-1884-005 rev -B |
| + | Location: /hw/module/001c01/IXbrick/xtalk/15 |
| + | WS_INT_53 Board: barcode NAA339 part 030-1881-006 rev -A |
| + | Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/0/1/ioc4 |
| + | IO9 Board: barcode MYM427 part 030-1771-005 rev -A |
| + | Location: /hw/module/001c01/IXbrick/xtalk/15/pci-x/1/2 |
| + | PCI_SIO_UFC Board: barcode MYS681 part 030-1657-003 rev A |
| + | 2 700 MHZ IP35 Processors |
| + | CPU: MIPS R16000 Processor Chip Revision: 2.1 |
| + | FPU: MIPS R16010 Floating Point Chip Revision: 2.1 |
| + | CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled) |
| + | Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc |
| + | CPU 1 at Module 001c01/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled) |
| + | Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc |
| + | Main memory size: 8192 Mbytes |
| + | Instruction cache size: 32 Kbytes |
| + | Data cache size: 32 Kbytes |
| + | Secondary unified instruction/data cache size: 4 Mbytes |
| + | Memory at Module 001c01/Slot 0: 8192 MB (enabled) |
| + | Bank 0 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 1 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 2 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 3 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 4 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 5 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 6 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Bank 7 contains 1024 MB (Premium) DIMMS (enabled) |
| + | Integral SCSI controller 3: Version Fibre Channel QL2342 Port 1, 133 MHz PCI-X |
| + | Integral SCSI controller 5: Version Fibre Channel LS949X Port 0 |
| + | Integral SCSI controller 4: Version Fibre Channel QL2342 Port 2, 133 MHz PCI-X |
| + | Integral SCSI controller 6: Version Fibre Channel LS949X Port 1 |
| + | Disk drive: unit 16 on SCSI controller 6 (unit 16) |
| + | Disk drive: unit 17 on SCSI controller 6 (unit 17) |
| + | Disk drive: unit 18 on SCSI controller 6 (unit 18) |
| + | Disk drive: unit 19 on SCSI controller 6 (unit 19) |
| + | Disk drive: unit 20 on SCSI controller 6 (unit 20) |
| + | Disk drive: unit 21 on SCSI controller 6 (unit 21) |
| + | Disk drive: unit 22 on SCSI controller 6 (unit 22) |
| + | Disk drive: unit 23 on SCSI controller 6 (unit 23) |
| + | Disk drive: unit 24 on SCSI controller 6 (unit 24) |
| + | Disk drive: unit 25 on SCSI controller 6 (unit 25) |
| + | Disk drive: unit 26 on SCSI controller 6 (unit 26) |
| + | Disk drive: unit 27 on SCSI controller 6 (unit 27) |
| + | Disk drive: unit 28 on SCSI controller 6 (unit 28) |
| + | Disk drive: unit 29 on SCSI controller 6 (unit 29) |
| + | Disk drive: unit 30 on SCSI controller 6 (unit 30) |
| + | Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4 |
| + | CDROM: unit 0 on SCSI controller 2 |
| + | Integral SCSI controller 0: Version QL12160, low voltage differential |
| + | Disk drive: unit 1 on SCSI controller 0 (unit 1) |
| + | Integral SCSI controller 1: Version QL12160, low voltage differential |
| + | IOC3/IOC4 serial port: tty3 |
| + | IOC3/IOC4 serial port: tty4 |
| + | IOC3/IOC4 serial port: tty5 |
| + | IOC3/IOC4 serial port: tty6 |
| + | Graphics board: V12 |
| + | Integral Gigabit Ethernet: tg0, module 001c01, PCI bus 1 slot 4 |
| + | Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 3 |
| + | Iris Audio Processor: version MAD revision 1, number 1 |
| + | Iris Audio Processor: version RAD revision 13.0, number 1 |
| + | PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1 |
| + | PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1 |
| + | PCI Adapter ID (vendor 0x1000, device 0x0640) PCI slot 2 |
| + | PCI Adapter ID (vendor 0x1000, device 0x0640) PCI slot 2 |
| + | PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1 |
| + | PCI Adapter ID (vendor 0x104c, device 0xac28) PCI slot 2 |
| + | PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3 |
| + | PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4 |
| + | PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2 |
| + | PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1 |
| + | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 |
| + | PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 3 |
| + | IOC4 firmware revision 79 |
| + | IOC3/IOC4 external interrupts: 1 |
| + | HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled) |
| + | Dual Channel Display |
| + | IP35prom in Module 001c01/Slot n0: Revision 6.210 |
| + | |
| + | |
| + | /usr/gfx/gfxinfo |
| + | Graphics board 0 is "ODYSSEY" graphics. |
| + | Managed (":0.0") 1920x1200 |
| + | BUZZ version B.2 |
| + | PB&J version 1 |
| + | 128MB memory |
| + | Banks: 4, CAS latency: 3 |
| + | DM5 attached to Dual Channel 1 |
| + | Monitor 0 type: Unknown |
| + | Dual Channel Display option |
| + | Monitor 1 type: Unknown Monitor 2 type: Unknown |
| + | Channel 0: |
| + | Origin = (0,0) |
| + | Video Output: 1920 pixels, 1200 lines, 49.99Hz (1920x1200_50f) |
| + | |
| + | |
| + | l1cmd serial all |
| + | |
| + | Data Location Value |
| + | ------------------------------ ------------ -------- |
| + | Local System Serial Number NVRAM P1000512 |
| + | Reference System Serial Number NVRAM P1000512 |
| + | Local Brick Serial Number EEPROM NAA339 |
| + | Reference Brick Serial Number NVRAM NAA339 |
| + | |
| + | |
| + | EEPROM Product Name Serial Part Number Rev T/W |
| + | ---------- -------------- ------------- -------------------- --- ------ |
| + | INTERFACE WS_INT_53 NAA339 030_1881_006 A 00 |
| + | IO9 IO9 MYM427 030_1771_005 A 00 |
| + | ODYSSEY ODY128B1_2 NTX598 030_1884_005 B 00 |
| + | SNOWBALL SNOWBALL_EDGE NAL990 030_1927_003 B 00 |
| + | NODE IP53_2CPU MZY208 030_1869_001 C 00 |
| + | IO DGHTR CHWS_IO_DAUG MYR202 030_1875_003 A 00 |
| + | |
| + | EEPROM JEDEC-SPD Info Part Number Rev Speed SGI |
| + | ---------- ------------------------ ------------------ ---- ------ -------- |
| + | DIMM 0 CE000000000000000C934800 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 2 CE000000000000000C0C5A00 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 4 CE000000000000000C7B5A00 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 6 CE000000000000000C965000 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 1 CE000000000000000CAC5900 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 3 CE000000000000000C885000 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 5 CE000000000000000C945000 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | DIMM 7 CE000000000000000C285100 M3 46L2820DT2-CA0 2D 10.0 N/A |
| + | |
| + | |
| + | |
| + | l1cmd env |
| + | Environmental monitoring is enabled and running. |
| + | |
| + | Description State Warning Limits Fault Limits Current |
| + | -------------- ---------- ----------------- ----------------- ------- |
| + | 1.8V Enabled 10% 1.62/ 1.98 20% 1.44/ 2.16 1.89 |
| + | 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 |
| + | 12V #2 Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12 |
| + | 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.49 |
| + | 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.61 |
| + | 12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 |
| + | 5V AUX Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 |
| + | 3.3V AUX Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.23 |
| + | 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 |
| + | XIO 12V BIAS Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 11.94 |
| + | XIO 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 |
| + | XIO 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.56 |
| + | XIO 3.3V AUX Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.29 |
| + | NODE 3.3V AUX Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.27 |
| + | NODE 5V AUX Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 |
| + | NODE 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 11.94 |
| + | NODE SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.59 |
| + | NODE 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.57 |
| + | NODE VCPU Enabled 10% 1.13/ 1.38 20% 1.00/ 1.50 1.31 |
| + | |
| + | Description State Warning RPM Current RPM |
| + | --------------- ---------- ----------- ----------- |
| + | FAN 0 NODE 1 Enabled 1800 2177 |
| + | FAN 1 NODE 2 Enabled 1800 2163 |
| + | FAN 2 NODE 3 Enabled 1800 2250 |
| + | FAN 3 PCI 1 Enabled 1350 1520 |
| + | FAN 4 PCI 2 Enabled 1350 1506 |
| + | FAN 5 HD Enabled 1620 3183 |
| + | FAN 6 ODY 1 Enabled 1350 2481 |
| + | FAN 7 ODY 2 Enabled 1350 2343 |
| + | |
| + | Advisory Critical Fault Current |
| + | Description State Temp Temp Temp Temp |
| + | ----------------- ---------- --------- --------- --------- --------- |
| + | 0 INTERFACE 0 Enabled [Autofan Control] 76C/168F 37C/ 98F |
| + | 1 INTERFACE 1 Enabled [Autofan Control] 76C/168F 34C/ 93F |
| + | 2 INTERFACE 2 Enabled [Autofan Control] 76C/168F 37C/ 98F |
| + | 3 INTERFACE 3 Enabled [Autofan Control] 76C/168F 39C/102F |
| + | 4 ODYSSEY Enabled [Autofan Control] 76C/168F 50C/122F |
| + | 5 NODE Enabled [Autofan Control] 76C/168F 47C/116F |
| + | 6 BEDROCK Enabled [Autofan Control] 85C/185F 40C/104F |
| + | |
| + | Zone Temp Target Current Zone Fan Curr/Min |
| + | Zone Name State Sensors Average Average Index Fan % |
| + | --------- -------- ------------ -------- -------- --------- --------- |
| + | Node Enabled 5,6 62C/143F 43C/109F 0 46%/ 46% |
| + | PCI Enabled 0,1,2,3 45C/113F 36C/ 96F 3,4 57%/ 57% |
| + | ODY Enabled 4 50C/122F 50C/122F 6 81%/ 61% |
| + | HD Enabled 5 40C/104F 47C/116F 5 58%/ 38% |
| + | |
| + | </pre> |
| + | |
| + | [[Image:Tezro-rear-1.jpg|thumb|right|A Tezro from behind]] |
| + | |
| + | |
| + | == External links == |
| + | * [http://web.archive.org/web/20080605045856rn_1/www.sgi.com/products/remarketed/tezro/ Archived Tezro home page] |
| + | * [http://www.sgi.com/newsroom/press_releases/2003/july/tezro.html Press release announcing the Tezro] |
| + | * [http://techpubs.sgi.com/library/tpl/cgi-bin/summary.cgi?db=bks&docnumber=007-4564-001 Silicon Graphics Tezro Visual Workstation Hardware User's Guide: Tower Configuration] |
| + | * [http://techpubs.sgi.com/library/tpl/cgi-bin/summary.cgi?db=bks&docnumber=007-4643-003 Silicon Graphics Tezro Visual Workstation Hardware User's Guide: Rackmount Configuration] |
| + | * [http://en.wikipedia.org/wiki/Tezro Tezro] at Wikipedia |
| + | * [http://sgistuff.net/hardware/systems/tezro.html Tezro] at sgistuff.net |
| + | |
| + | == Manuals == |
| * [https://cdn.preterhuman.net/texts/computing/sgi/007-4643-003.pdf 007-4643-003] - Silicon Graphics Tezro Visual Workstation Hardware User’s Guide: Rackmount Configuration | | * [https://cdn.preterhuman.net/texts/computing/sgi/007-4643-003.pdf 007-4643-003] - Silicon Graphics Tezro Visual Workstation Hardware User’s Guide: Rackmount Configuration |
| | | |
| | | |
| [[Category:SGI]] [[Category:Computing]] | | [[Category:SGI]] [[Category:Computing]] |