Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
AST 3G-Plus II
Jumper Settings (202161-001)
Category |
Video |
Video Types Supported |
CGA, EGA, Monochrome |
Video Processor |
Western Digital |
Highest Resolution Supported |
720 x 348 |
Data Bus Type |
8-bit ISA |
Memory Type |
DRAM |
Maximum Onboard Memory |
256KB |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
15-pin analog video port |
CN1 |
RCA video port 1 |
RCA1 |
32-pin feature connector |
J1 |
RCA video port 2 |
RCA2 |
Light pen connector |
J2 |
VIDEO MODE CONFIGURATION | ||||||
Type |
Resolution |
SW1/1 |
SW1/2 |
SW1/3 |
SW1/4 | |
» |
EGA |
640 x 350 |
Off |
On |
On |
Off |
CGA |
320 x 200 |
On |
On |
On |
Off | |
Monochrome |
640 x 350 |
Off |
Off |
On |
Off |
MONITOR AUTODETECT | ||
Setting |
SW1/6 | |
» |
Disabled |
Off |
Enabled |
On | |
Note: Enabling autodetect disabled switches SW1/1 through SW1/4. |
AUTO EMULATION | ||
Setting |
SW1/5 | |
» |
Disabled |
Off |
Enabled |
On | |
Note: Auto emulation is used for Hercules and CGA emulation modes. |
FACTORY CONFIGURED SETTING | |
Jumper |
Setting |
E1 |
Pins 1 & 2 closed |
MISCELLANEOUS TECHNICAL NOTE |
Note:The AST 3G-Plus II comes equipped with 64KB of memory and is upgradeable to 256KB. The type of memory used and the location of the Banks is unspecified in manufacturer documentation. Upgrade kits are available through AST. |