Creative Labs Sound Blaster AWE32 CT2760

AWE32 sound blaster card from Creative Labs, for 16-bit ISA PC compatibles.

Jumper Settings

Card Type	Sound card
Chipset/Controller	Creative Technology
I/O Options	CD-ROM interface, game/MIDI port, headphone jack, audio line in/line-out, microphone jack, speaker jack
Maximum DRAM	32MB

CONNECTIONS
Purpose	Location	Purpose	Location
Creative CD-ROM interface	CN1	Microphone jack	CN7
Sony CD-ROM interface	CN2	Audio line-out jack	CN8
Mitsumi CD-ROM interface	CN3	Speaker jack	CN9
CD in connector	CN4	Game/MIDI port	CN10
PC speaker connector	CN5	Advanced Signal Processor socket	CN11
Audio line-in jack	CN6

CD-ROM TYPE SELECT
Type		JP1	JP2	JP3	JP4
»	Creative	Open	Open	Open	Closed
	Sony	Open	Open	Closed	Open
	Mitsumi	Open	Closed	Open	Open
	Other	Closed	Open	Open	Open

MITSUMI CD-ROM DRIVE I/O ADDRESS
Address		JP5	JP6
»	340h	Closed	Open
	Alternate	Open	Closed

MITSUMI CD-ROM DRIVE DMA SELECT
Channel		JP10	JP11
»	DMA7	Open	Closed
	DMA6	Closed	Open

AUDIO/MITSUMI CD-ROM DRIVE INTERRUPT SELECT
IRQ		JP13	JP14	JP15
»	IRQ11	Open	Open	Closed
	IRQ3	Closed	Open	Open
	IRQ10	Open	Closed	Open

MPU-401 EMULATION
Setting		JP12
»	Enabled	Closed
	Disabled	Open

ADVANCED SIGNAL PROCESSOR
Setting		JP16	JP17
»	Disabled/not installed	Closed	Closed
	Enabled/installed	Open	Open

GAME PORT
Setting		JP18
»	Enabled	Closed
	Disabled	Open

CD-AUDIO I/O ADDRESS
Address		JP19	JP20
»	220h	Closed	Closed
	240h	Open	Closed
	260h	Closed	Open
	280h	Open	Open

MIDI I/O ADDRESS
Address		JP21
»	330h	Closed
	300h	Open

DRAM CONFIGURATION
Size		JP7	Bank 0	Bank 1
»	512KB	Pins 2 & 3 closed	512KB	None
	2MB	Pins 1 & 2 closed	Disabled	(2) 256K x 36
	4MB	Pins 1 & 2 closed	Disabled	(2) 512K x 36
	8MB	Pins 1 & 2 closed	Disabled	(2) 1M x 36
	16MB	Pins 1 & 2 closed	Disabled	(2) 2M x 36
	32MB	Pins 1 & 2 closed	Disabled	(2) 4M x 36
Note:The location of Bank 0 is not specified in manufacturer’s documentation.

More Jumper Settings

Card Type	Sound card
Chip Set	Creative Technology
Maximum Onboard Memory	Unidentified
I/O Options	CD-ROM interfaces (3), microphone connector, line in connector, line out connector, speaker out connector, game/MIDI port, PC internal speaker, CD-ROM audio in connector, feature connector
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
Line in connector	CN1	Feature connector	CN7
Microphone connector	CN2	Panasonic CD-ROM interface	CN9
Line out connector	CN3	Sony CD-ROM interface	CN10
Speaker out connector	CN4	Mitsumi CD-ROM interface	CN11
Game/MIDI port	CN5	PC internal speaker	JP15
CD-ROM audio in connector	CN6

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured – do not alter	CN8	Unidentified
»	Factory configured – do not alter (volume)	JP9	Unidentified
»	Joystick enabled	JYEN	Closed
	Joystick disabled	JYEN	Open
»	MP-401 enabled	MPUEN	Closed
	MP-401 disabled	MPUEN	Open
»	MP-401 I/O address select 330	MSEL	Closed
	MP-401 I/O address select 300	MSEL	Open
»	Factory configured – do not alter	SPDIF	Unidentified

DRAM CONFIGURATION

Note: Board is factory installed with 512KB memory. The maximum amount of onboard memory is unidentified.

DRAM JUMPER CONFIGURATION
Setting		JP2
»	Memory upgrade disabled	Pins 2 & 3 closed
	Memory upgrade enabled	Pins 1 & 2 closed

CD-ROM SELECTION
Type	J1	J2	J3	J4
Creative	Open	Open	Open	Closed
Sony	Open	Open	Closed	Open
Mitsumi	Open	Closed	Open	Open
Other	Closed	Open	Open	Open

AUDIO I/O ADDRESS SELECTION
Address		IOS0	IOS1
»	220	Closed	Closed
	240	Open	Closed
	260	Closed	Open
	280	Open	Open

MITSUMI CD-ROM PORT ADDRESS SELECTION
Address		CD0	CD1
	310	Closed	Closed
	320	Open	Closed
»	340	Closed	Open
	350	Open	Open

MITSUMI CD-ROM DMA CHANNEL SELECTION
Channel		DRQ6	DRQ7
	6	Closed	Open
»	7	Open	Closed

CSP CHIP SELECTION
Setting	APSD	IFSD
Enabled	Open	Open
Disabled	Closed	Closed

MITSUMI CD-ROM INTERRUPT SELECTION
IRQ	IRQ3	IRQ10	IRQ11
3	Closed	Open	Open
10	Open	Closed	Open
11	Open	Open	Closed

Jumper Settings (Rev. 3)

Card Type	Sound card
Chip Set	Creative Technology
Maximum Onboard Memory	Unidentified
I/O Options	CD-ROM interfaces (3), microphone connector, line in connector, line out connector, speaker out connector, game/MIDI port, PC internal speaker, CD-ROM audio in connector, feature connector
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
Line in connector	CN1	Mitsumi CD-ROM interface	CN7
Microphone connector	CN2	Sony CD-ROM interface	CN8
Line out connector	CN3	Panasonic CD-ROM interface	CN9
Speaker out connector	CN4	Feature connector	CN10
Game/MIDI port	CN5	PC internal speaker	JP15
CD-ROM audio in connector	CN6

USER CONFIGURABLE SETTINGS
Function		Label	Position
	EEPROM enabled	EEPROM	Unidentified
	EEPROM disabled	EEPROM	Unidentified
»	Factory configured – do not alter	JP16	Unidentified
»	Factory configured – do not alter	JP17	Unidentified
»	Joystick enabled	JYEN	Closed
	Joystick disabled	JYEN	Open
»	MP-401 enabled	MBFEN	Closed
	MP-401 disabled	MBFEN	Open
»	MP-401 I/O address select 330	MSEL	Closed
	MP-401 I/O address select 300	MSEL	Open
»	Factory configured – do not alter	SPDIF	Unidentified

DRAM CONFIGURATION

Note: Board is factory installed with 512KB memory. The maximum amount of onboard memory is unidentified.

DRAM JUMPER CONFIGURATION
Setting		JP2
»	Memory upgrade disabled	Pins 2 & 3 closed
	Memory upgrade enabled	Pins 1 & 2 closed

AUDIO I/O ADDRESS SELECTION
Address		IOS0	IOS1
»	220	Closed	Closed
	240	Open	Closed
	260	Closed	Open
	280	Open	Open

CSP CHIP SELECTION
Setting	APSD	IFSD
Enabled	Open	Open
Disabled	Closed	Closed

See Also

• Creative Labs

Musical Instrument Digital Interface