This article describes the (re)installation of the [[IRIX 6.5.28]] operating system on a [[SGI Fuel]]. The installation is performed over a local network (LAN), using a [[SGI Indy]] workstation as installation server. The main focus of this article is to demonstrate the feature of driving inst using a pre-written command file instead of manually performing all needed software selection steps. Although the example specifically describes an [[IRIX 6.5.28]] installation, the demonstrated methods will work with any 6.5.x installation. Just make sure you use a release that suits your hardware. | This article describes the (re)installation of the [[IRIX 6.5.28]] operating system on a [[SGI Fuel]]. The installation is performed over a local network (LAN), using a [[SGI Indy]] workstation as installation server. The main focus of this article is to demonstrate the feature of driving inst using a pre-written command file instead of manually performing all needed software selection steps. Although the example specifically describes an [[IRIX 6.5.28]] installation, the demonstrated methods will work with any 6.5.x installation. Just make sure you use a release that suits your hardware. |