Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
Difference between revisions of "Media Vision Double Fusion LX LSMI"
(Created page with "=Jumper Settings= <TABLE CELLSPACING=0 BORDER=0> <TR> <TD WIDTH="32%" VALIGN="TOP"> <FONT FACE="Arial"> <B> <P>Card Type </B> </FONT> <TD WIDTH="68%" VALIGN="TOP"> <FONT FACE=...") |
|||
Line 570: | Line 570: | ||
<TR> | <TR> | ||
<TD WIDTH="100%" VALIGN="TOP" COLSPAN=5 COLOR="#000000"> | <TD WIDTH="100%" VALIGN="TOP" COLSPAN=5 COLOR="#000000"> | ||
− | |||
− | |||
<FONT FACE="Arial"> | <FONT FACE="Arial"> | ||
<P> Note: When ID 4 is selected, the base I/O address is forced to 388h. For all other ID’s the software scans for available settings. Refer to the manufacturer’s documentation for possible settings. | <P> Note: When ID 4 is selected, the base I/O address is forced to 388h. For all other ID’s the software scans for available settings. Refer to the manufacturer’s documentation for possible settings. | ||
− | |||
− | |||
</FONT> | </FONT> | ||
</TR> | </TR> |
Revision as of 22:52, 14 December 2020
Jumper Settings
Card Type |
Sound card |
Chip Set |
Unidentified |
Maximum Onboard Memory |
Unidentified |
I/O Options |
Game/MIDI port, microphone in, stereo line in, stereo line out, audio in, LMSI connector |
Data Bus |
16-bit ISA |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Game/MIDI port |
CN1 |
Stereo line in |
CN4 |
Microphone in |
CN2 |
Audio in - CD-ROM |
J5 |
Stereo line out |
CN3 |
15-pin LMSI connector |
J17 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
DMA sharing |
J4 |
Pins 1 & 2 closed |
Note: The default DMA sharing connector has pins 1 & 2 closed but it is unknown whether this enables or disables DMA sharing. |
CD-ROM I/O ADDRESS SELECTION | ||||
Setting |
J18/pins 1 & 2 |
J18/pins 3 & 4 |
J18/pins 5 & 6 | |
300 |
Closed |
Closed |
Closed | |
310 |
Closed |
Closed |
Open | |
320 |
Closed |
Open |
Closed | |
330 |
Closed |
Open |
Open | |
» |
340 |
Open |
Closed |
Closed |
350 |
Open |
Closed |
Open | |
360 |
Open |
Open |
Closed | |
370 |
Open |
Open |
Open |
BOARD ID SELECTION | ||||
Setting |
J3/pins 1 & 2 |
J3/pins 3 & 4 |
J3/pins 5 & 6 | |
» |
0 |
Open |
Open |
Open |
1 |
Closed |
Open |
Open | |
2 |
Open |
Closed |
Open | |
3 |
Closed |
Closed |
Open | |
4 |
Open |
Open |
Closed | |
Note: When ID 4 is selected, the base I/O address is forced to 388h. For all other ID’s the software scans for available settings. Refer to the manufacturer’s documentation for possible settings. |
CD-ROM INTERRUPT SELECTION | ||||
Setting |
J19/pins 1 & 2 |
J19/pins 3 & 4 |
J19/pins 5 & 6 | |
» |
IRQ11 |
Closed |
Open |
Open |
IRQ12 |
Open |
Closed |
Open | |
IRQ15 |
Open |
Open |
Closed |