| Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
Motorola Atlas: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
=== Display === | === Display === | ||
If you are using a terminal other than a VGA as your console device, make sure it is configured as follows: 9600 8N1 COM1 serial. | If you are using a terminal other than a VGA as your console device, make sure it is configured as follows: 9600 8N1 COM1 serial. | ||
== Image Gallery == | |||
<gallery mode="packed"> | |||
Image:Motorola atlas1.jpg | |||
Image:Motorola atlas2.jpg | |||
Image:Motorola atlas3.jpg | |||
Image:Motorola atlas4.jpg | |||
Image:Motorola atlas5.jpg | |||
</gallery> | |||
== Manuals == | == Manuals == | ||
Revision as of 03:04, 26 December 2017
CPU Options[edit]
The Atlas motherboard directly supports the MPC603, MPC603e, and MPC604 processors at speeds up to 100 MHz or more, where those speeds are supported by both the installed MPC60x processor and the MPC105 memory controller. The restrictions are that the CPU bus speed may not exceed 66 MHz and the PCI bus speed may not exceed 33 MHz.
Memory[edit]
The Atlas motherboard uses SIMM (Single In-Line Memory Module) technology for implementing DRAM memory. The motherboard can be populated with either 32-bit or 36-bit (with parity) 72-pin SIMM memory modules. The minimum number of SIMMs required for operation of the Atlas motherboard is two.
Display[edit]
If you are using a terminal other than a VGA as your console device, make sure it is configured as follows: 9600 8N1 COM1 serial.
