Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
Difference between revisions of "OrangePC 340"
Jump to navigation
Jump to search
Line 2: | Line 2: | ||
[[File:Opc300.gif|right]] | [[File:Opc300.gif|right]] | ||
− | NuBus interface; Up to 64MB of RAM, 1MB upgradeable to 2MB video DRAM for SuperVGA; 256K of level 2 cache. | + | [[NuBus]] interface; Up to 64MB of RAM, 1MB upgradeable to 2MB video DRAM for SuperVGA; 256K of level 2 cache. |
'''Hardware Features:''' | '''Hardware Features:''' |
Latest revision as of 17:49, 26 October 2020
NuBus interface; Up to 64MB of RAM, 1MB upgradeable to 2MB video DRAM for SuperVGA; 256K of level 2 cache.
Hardware Features:
- 168 Pin socket for Intel 486 or 5x86 compatible processors
- Supports user selectable; 3.3 or 5 volts; 486DX2; DX4; Cyrix 5x86
- RAM Specifications: 72 Pin SIMM, 70ns , 32 or 36-bit wide. Configurations allow any combination of 2, 4, 8, 16 or 32MB SIMMS
Display Graphics:
- SuperVGA on any Macintosh compatible Multi-Scan or Multi-Sync monitor
- Supports 640x480 in 16, 256, 32K, 64K and 16M colors
- Supports 800x600 in 16, 256, 32K, 64K and 16M colors
- Supports 1024x768 in 16, 256, 32K and 64K colors
- Supports 1280x1024 in 16 and 256 colors
Cache Memory:
- 256K 20ns of high speed memory greatly enhances processing speed of all performance processors
Software Drivers Supported:
- AutoCAD, VersaCAD, Windows 3.1, Windows 95, VESA BIOS Extension
Sound Support:
- 16-bit Sound Blaster compatible
Multi-Port cable:
- PC compatible game port
- Two 16550 UART compatible serial ports for use with printer, plotter or modem
- One bi-directional ECP/SPP parallel port for use with printer, plotter or hardware protection key (dongles)
- One stereo sound-out jack, one stereo input jack for sound-in or microphone
Software Features:
- Runs PC/AT 386 and 486 compatible software with full SuperVGA graphics
- Windows 3.1 and Windows 95 compatible.
- Use Macintosh or PC SCSI devices connected to Macintosh, like SyQuest drive
- Supports Advanced SCSI Programming Interface (ASPI) to access the Mac SCSI bus
- Use Macintosh SuperDrive as drive A: Read and write to either Macintosh or MS-DOS floppy disks in SuperDrive
- Use Macintosh hard disk to emulate hard drives C: and D:
- Shared clipboard between Macintosh and Windows environments
- Files can be accessed by both Macintosh and DOS environments
- Read Macintosh or PC type CD-ROM disks from Mac CD-ROM drive
- True dual processing; both Mac and DOS or Windows can run programs simultaneously
- Supports Open Data-Link Interface (ODI) for PC networking and TCP/IP. Uses Macintosh built-in Ethernet or Token Ring cards
Hardware/Software Requirements
- Any NuBus based Macintosh or Macintosh compatible computer with at least one available full sized 13" NuBus slot
- 2MB of Macintosh RAM (OrangePC application uses less than 768K)
- Apple FDHD and hard disk
- Extended keyboard is preferred