* The PowerPC 601 processor is very fragile and putting too much weight on the heatsink may actually crack the CPU.
* The PowerPC 601 processor is very fragile and putting too much weight on the heatsink may actually crack the CPU.
* The 7100 model in particular is said to have poor heatsink compound and the system will likely overheat unless the original compound has been cleaned and replaced.
* The 7100 model in particular is said to have poor heatsink compound and the system will likely overheat unless the original compound has been cleaned and replaced.
+
+
=Troubleshooting/Repair=
+
===Capacitor replacement===
+
The SMD capacitors on the logic board will most likely have already started leaking electrolyte out the bottom, and failing to replace them in a timely manner will result in further leakage with possible damage to nearby components. See below list of capacitors to replace: