Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
SGI Onyx4
Jump to navigation
Jump to search
Example hinv
hinv -vm Location: /hw/module/001c12/node IP53_4CPU Board: barcode NCF135 part 030-1868-001 rev -C Location: /hw/module/001c12/CGbrick/xtalk/10 2U_INT_53 Board: barcode NDV777 part 030-1809-003 rev -B Location: /hw/module/001c12/IXbrick/xtalk/15 2U_INT_53 Board: barcode NDM628 part 030-1809-003 rev -B Location: /hw/module/001c12/IXbrick/xtalk/15/pci-x/0/1/ioc4 IO9 Board: barcode NEA076 part 030-1771-005 rev -A Location: /hw/module/001c14/node IP53_4CPU Board: barcode NCW007 part 030-1868-002 rev -A Location: /hw/module/001c14/CGbrick/xtalk/10 2U_INT_53 Board: barcode NDL517 part 030-1809-003 rev -B Location: /hw/module/001c14/IXbrick/xtalk/15 2U_INT_53 Board: barcode NEA464 part 030-1809-003 rev -B Processor 0: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.1 FPU: MIPS R16010 Floating Point Chip Revision: 2.1 Processor 1: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.1 FPU: MIPS R16010 Floating Point Chip Revision: 2.1 Processor 2: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.1 FPU: MIPS R16010 Floating Point Chip Revision: 2.1 Processor 3: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.1 FPU: MIPS R16010 Floating Point Chip Revision: 2.1 Processor 4: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.2 FPU: MIPS R16010 Floating Point Chip Revision: 2.2 Processor 5: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.2 FPU: MIPS R16010 Floating Point Chip Revision: 2.2 Processor 6: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.2 FPU: MIPS R16010 Floating Point Chip Revision: 2.2 Processor 7: 700 MHZ IP35 CPU: MIPS R16000 Processor Chip Revision: 2.2 FPU: MIPS R16010 Floating Point Chip Revision: 2.2 CPU 0 at Module 001c12/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 1 at Module 001c12/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 2 at Module 001c12/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 3 at Module 001c12/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 4 at Module 001c14/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 5 at Module 001c14/Slot 0/Slice B: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 6 at Module 001c14/Slot 0/Slice C: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz Tap 0xc CPU 7 at Module 001c14/Slot 0/Slice D: 700 Mhz MIPS R16000 Processor Chip (enabled) Processor revision: 2.2. Scache: Size 4 MB Speed 350 Mhz Tap 0xc Main memory size: 16384 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Memory at Module 001c12/Slot 0: 8192 MB (enabled) Bank 0 contains 1024 MB (Premium) DIMMS (enabled) Bank 1 contains 1024 MB (Premium) DIMMS (enabled) Bank 2 contains 1024 MB (Premium) DIMMS (enabled) Bank 3 contains 1024 MB (Premium) DIMMS (enabled) Bank 4 contains 1024 MB (Premium) DIMMS (enabled) Bank 5 contains 1024 MB (Premium) DIMMS (enabled) Bank 6 contains 1024 MB (Premium) DIMMS (enabled) Bank 7 contains 1024 MB (Premium) DIMMS (enabled) Memory at Module 001c14/Slot 0: 8192 MB (enabled) Bank 0 contains 1024 MB (Premium) DIMMS (enabled) Bank 1 contains 1024 MB (Premium) DIMMS (enabled) Bank 2 contains 1024 MB (Premium) DIMMS (enabled) Bank 3 contains 1024 MB (Premium) DIMMS (enabled) Bank 4 contains 1024 MB (Premium) DIMMS (enabled) Bank 5 contains 1024 MB (Premium) DIMMS (enabled) Bank 6 contains 1024 MB (Premium) DIMMS (enabled) Bank 7 contains 1024 MB (Premium) DIMMS (enabled) Integral SCSI controller 3: Version Fibre Channel QL2310, 66 MHz PCI-X Integral SCSI controller 2: Version IDE (ATA/ATAPI) IOC4 CDROM: unit 0 on SCSI controller 2 Integral SCSI controller 0: Version QL12160, low voltage differential Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 2 on SCSI controller 0 (unit 2) Integral SCSI controller 1: Version QL12160, low voltage differential IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3/IOC4 serial port: tty5 IOC3/IOC4 serial port: tty6 ImageSync1 board: unit 0, version 1.10 Graphics board: SG2 Graphics board: SG2 Graphics board: SG2 Graphics board: SG2 Integral Gigabit Ethernet: tg0, module 001c12, PCI bus 1 slot 4 Iris Audio Processor: version RAD revision 13.0, number 1 PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e47) PCI slot 1 PCI Adapter ID (vendor 0x1002, device 0x4e67) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x100a) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x100c) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 3 PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 4 PCI Adapter ID (vendor 0x1077, device 0x2300) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1 PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2 PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 2 PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 2 IOC4 firmware revision 79 IOC3/IOC4 external interrupts: 1 HUB in Module 001c12/Slot 0: Revision 2 Speed 200.00 Mhz (enabled) HUB in Module 001c14/Slot 0: Revision 2 Speed 200.00 Mhz (enabled) IP35prom in Module 001c12/Slot n0: Revision 6.210 IP35prom in Module 001c14/Slot n0: Revision 6.210 USB controller: type OHCI USB controller: type OHCI * serial all 001c12: Data Location Value ------------------------------ ------------ -------- Local System Serial Number NVRAM M- Reference System Serial Number Attached C M- Local Brick Serial Number EEPROM N- Reference Brick Serial Number NVRAM N- EEPROM Product Name Serial Part Number Rev T/W ---------- -------------- ------------- -------------------- --- ------ INTERFACE 2U_INT_53 NDM628 030_1809_003 B 00 IO9 IO9 NEA076 030_1771_005 A 00 ODYSSEY no hardware detected RISER 2U_RISER NEB595 030_1808_005 A 00 NODE IP53_4CPU NCF135 030_1868_001 C 00 SNOWBALL no hardware detected PS 1 no hardware detected PS 2 DPS-500EBE XPD0351004641 060-0178-003 S4 EEPROM JEDEC-SPD Info Part Number Rev Speed SGI ---------- ------------------------ ------------------ ---- ------ -------- DIMM 0 7F7FFE000000000012002772 CM2201B1 2 8.0 N/A DIMM 2 7F7FFE000000000012002789 CM2201B1 2 8.0 N/A DIMM 4 7F7FFE00000000001200275E CM2201B1 2 8.0 N/A DIMM 6 7F7FFE000000000012002760 CM2201B1 2 8.0 N/A DIMM 1 7F7FFE000000000012002763 CM2201B1 2 8.0 N/A DIMM 3 7F7FFE000000000012002777 CM2201B1 2 8.0 N/A DIMM 5 7F7FFE000000000012002761 CM2201B1 2 8.0 N/A DIMM 7 7F7FFE000000000012002764 CM2201B1 2 8.0 N/A 001v10: Data Location Value ------------------------------ ------------ -------- Local System Serial Number NVRAM M- Reference System Serial Number Attached C M- Local Brick Serial Number EEPROM N- Reference Brick Serial Number NVRAM N- EEPROM Product Name Serial Part Number Rev T/W ---------- -------------- ------------- -------------------- --- ------ INTERFACE 2U_INT_53 NDV777 030_1809_003 B 00 IO9 no hardware detected ODYSSEY no hardware detected RISER 2U_AGP_RISER NBC580 030_1872_005 A 00 NODE no hardware detected SNOWBALL no hardware detected PS 1 no hardware detected PS 2 DPS-500EBE XPD0351004880 060-0178-003 S4 EEPROM JEDEC-SPD Info Part Number Rev Speed SGI ---------- ------------------------ ------------------ ---- ------ -------- DIMM 0 no hardware detected DIMM 2 no hardware detected DIMM 4 no hardware detected DIMM 6 no hardware detected DIMM 1 no hardware detected DIMM 3 no hardware detected DIMM 5 no hardware detected DIMM 7 no hardware detected 001c14: Data Location Value ------------------------------ ------------ -------- Local System Serial Number NVRAM M- Reference System Serial Number Attached C M- Local Brick Serial Number EEPROM N- Reference Brick Serial Number NVRAM N- EEPROM Product Name Serial Part Number Rev T/W ---------- -------------- ------------- -------------------- --- ------ INTERFACE 2U_INT_53 NEA464 030_1809_003 B 00 IO9 no hardware detected ODYSSEY no hardware detected RISER 2U_RISER NBH778 030_1808_005 A 00 NODE IP53_4CPU NCW007 030_1868_002 A 00 SNOWBALL no hardware detected PS 1 no hardware detected PS 2 DPS-500EBE XPD0351004734 060-0178-003 S4 EEPROM JEDEC-SPD Info Part Number Rev Speed SGI ---------- ------------------------ ------------------ ---- ------ -------- DIMM 0 7F7FFE0000000000120027C0 CM2201B1 2 8.0 N/A DIMM 2 7F7FFE0000000000120027BC CM2201B1 2 8.0 N/A DIMM 4 7F7FFE0000000000120027BF CM2201B1 2 8.0 N/A DIMM 6 7F7FFE0000000000120027BB CM2201B1 2 8.0 N/A DIMM 1 7F7FFE000000000012002765 CM2201B1 2 8.0 N/A DIMM 3 7F7FFE000000000012002768 CM2201B1 2 8.0 N/A DIMM 5 7F7FFE00000000001200276B CM2201B1 2 8.0 N/A DIMM 7 7F7FFE000000000012002766 CM2201B1 2 8.0 N/A 001v16: Data Location Value ------------------------------ ------------ -------- Local System Serial Number NVRAM M- Reference System Serial Number Attached C M- Local Brick Serial Number EEPROM N- Reference Brick Serial Number NVRAM N- EEPROM Product Name Serial Part Number Rev T/W ---------- -------------- ------------- -------------------- --- ------ INTERFACE 2U_INT_53 NDL517 030_1809_003 B 00 IO9 no hardware detected ODYSSEY no hardware detected RISER 2U_AGP_RISER NCG003 030_1872_005 A 00 NODE no hardware detected SNOWBALL no hardware detected PS 1 no hardware detected PS 2 DPS-500EBE XPD0351005693 060-0178-003 S4 EEPROM JEDEC-SPD Info Part Number Rev Speed SGI ---------- ------------------------ ------------------ ---- ------ -------- DIMM 0 no hardware detected DIMM 2 no hardware detected DIMM 4 no hardware detected DIMM 6 no hardware detected DIMM 1 no hardware detected DIMM 3 no hardware detected DIMM 5 no hardware detected DIMM 7 no hardware detected /usr/gfx/gfxinfo Graphics board 0 is "SG2" graphics. Managed (":0.0") 1280x1024 Memory Size: 128 MB Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 75.02Hz (1280x1024) Video Format Flags: (none) Sync Disabled Using Gamma Map 0 Monitor Type: FLATRON LCD Graphics board 1 is "SG2" graphics. Managed (":0.1") 1280x1024 Memory Size: 128 MB Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024) Video Format Flags: (none) Sync Disabled Using Gamma Map 0 Monitor Type: unknown Graphics board 2 is "SG2" graphics. Managed (":0.2") 1280x1024 Memory Size: 128 MB Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024) Video Format Flags: (none) Sync Disabled Using Gamma Map 0 Monitor Type: unknown Graphics board 3 is "SG2" graphics. Managed (":0.3") 1280x1024 Memory Size: 128 MB Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 85.02Hz (1280x1024) Video Format Flags: (none) Sync Disabled Using Gamma Map 0 Monitor Type: unknown pci 001c12-L1>* pci 001c12: Bus Slot Slot Stat Bus Stat Power Mode/Speed --- ---- --------- --------- ----- ---------- 1 1 0x90 0x01 0x04 15W PCI 66MHz 1 2 0xa7 0x00 0x04 7.5W PCI 66MHz 2 1 0x40 0x00 0x40 7.5W PCI 33MHz 2 2 0x04 0x00 0x40 7.5W PCI 33MHz 001v10: INFO: command not supported on this brick type 001c14: Bus Slot Slot Stat Bus Stat Power Mode/Speed --- ---- --------- --------- ----- ---------- 1 1 0x10 0xf5 0xa4 15W PCIX 66MHz 1 2 0x27 0x0f 0xa4 none PCIX 66MHz 2 1 0xc4 0xff 0xc4 none PCI 66MHz 2 2 0xa4 0x0f 0xc4 none PCI 66MHz 001v16: INFO: command not supported on this brick type env 001c12: Environmental monitoring is enabled and running. Description State Warning Limits Fault Limits Current -------------- ---------- ----------------- ----------------- ------- 1.8V Enabled 10% 1.62/ 1.98 20% 1.44/ 2.16 1.79 12V <not present> 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.30 12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.25 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.30 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.50 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 4.94 XIO 12V bias <not present> XIO 5V <not present> XIO 2.5V <not present> XIO 3.3V aux <not present> NODE0 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.25 NODE0 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 NODE0 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 NODE0 CPU Enabled 10% 1.13/ 1.38 20% 1.00/ 1.50 1.24 NODE0 SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.47 NODE0 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.48 Description State Warning RPM Current RPM -------------- ---------- ----------- ----------- FAN 0 EXHST 1 Enabled 2160 2295 FAN 1 EXHST 2 Enabled 2160 2311 FAN 2 PS Enabled 1575 2083 FAN 3 PCI 1 Enabled 2160 2616 FAN 4 PCI 2 Enabled 2160 2884 Advisory Critical Fault Current Description State Temp Temp Temp Temp ----------------- ---------- --------- --------- --------- --------- 0 INTERFACE 0 Enabled 31C/ 87F 48C/118F 55C/131F 16C/ 60F 1 INTERFACE 1 Enabled 31C/ 87F 48C/118F 55C/131F 18C/ 64F 2 INTERFACE 2 Enabled 31C/ 87F 48C/118F 55C/131F 19C/ 66F 3 PCI RISER Enabled 31C/ 87F 48C/118F 55C/131F 19C/ 66F 4 ODYSSEY <not present> 5 NODE Enabled 31C/ 87F 48C/118F 55C/131F 18C/ 64F 6 BEDROCK Enabled 31C/ 87F 48C/118F 55C/131F 14C/ 57F 001v10: Environmental monitoring is enabled and running. Description State Warning Limits Fault Limits Current -------------- ---------- ----------------- ----------------- ------- 1.8V Enabled 10% 1.62/ 1.98 20% 1.44/ 2.16 1.79 12V <not present> 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.34 12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.27 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.34 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.52 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 4.97 XIO 12V bias <not present> XIO 5V <not present> XIO 2.5V <not present> XIO 3.3V aux <not present> NODE0 3.3V aux <not present> NODE0 5V aux <not present> NODE0 12V <not present> NODE0 CPU <not present> NODE0 SRAM <not present> NODE0 1.5V <not present> Description State Warning RPM Current RPM -------------- ---------- ----------- ----------- FAN 0 EXHST 1 Enabled 1350 1591 FAN 1 PS Enabled 1575 1985 FAN 2 PCI 1 Enabled 1980 2250 FAN 3 PCI 2 Enabled 1980 2445 Advisory Critical Fault Current Description State Temp Temp Temp Temp ----------------- ---------- --------- --------- --------- --------- 0 INTERFACE 0 Enabled 50C/122F 54C/129F 58C/136F 32C/ 89F 1 INTERFACE 1 Enabled 50C/122F 54C/129F 58C/136F 35C/ 95F 2 INTERFACE 2 Enabled 50C/122F 54C/129F 58C/136F 27C/ 80F 3 PCI RISER Enabled 50C/122F 54C/129F 58C/136F 28C/ 82F 4 ODYSSEY <not present> 5 NODE <not present> 6 BEDROCK <not present> 001c14: Environmental monitoring is enabled and running. Description State Warning Limits Fault Limits Current -------------- ---------- ----------------- ----------------- ------- 1.8V Enabled 10% 1.62/ 1.98 20% 1.44/ 2.16 1.79 12V <not present> 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.00 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.32 12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.06 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.27 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.04 3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.32 2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.50 5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 4.94 XIO 12V bias <not present> XIO 5V <not present> XIO 2.5V <not present> XIO 3.3V aux <not present> NODE0 3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.27 NODE0 5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 5.02 NODE0 12V Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 11.94 NODE0 CPU Enabled 10% 1.13/ 1.38 20% 1.00/ 1.50 1.24 NODE0 SRAM Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.47 NODE0 1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.48 Description State Warning RPM Current RPM -------------- ---------- ----------- ----------- FAN 0 EXHST 1 Enabled 2160 2265 FAN 1 EXHST 2 Enabled 2160 2265 FAN 2 PS Enabled 1575 2163 FAN 3 PCI 1 Enabled 2160 2481 FAN 4 PCI 2 Enabled 2160 2812 Advisory Critical Fault Current Description State Temp Temp Temp Temp ----------------- ---------- --------- --------- --------- --------- 0 INTERFACE 0 Enabled 31C/ 87F 48C/118F 55C/131F 16C/ 60F 1 INTERFACE 1 Enabled 31C/ 87F 48C/118F 55C/131F 17C/ 62F 2 INTERFACE 2 Enabled 31C/ 87F 48C/118F 55C/131F 20C/ 68F 3 PCI RISER Enabled 31C/ 87F 48C/118F 55C/131F 18C/ 64F 4 ODYSSEY <not present> 5 NODE Enabled 31C/ 87F 48C/118F 55C/131F 17C/ 62F 6 BEDROCK Enabled 31C/ 87F 48C/118F 55C/131F 14C/ 57F 001v16:
Notes
The standard IRIX linker on 6.5.30 appears to be incompatible with GNU 64 bit builds, installation of MIPSPro-7.4 and dependencies fixes this.