Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
Difference between revisions of "SGI Origin 200"
m (Netfreak moved page SGI Origin200 to SGI Origin 200) |
|||
Line 1: | Line 1: | ||
+ | = Introduction = | ||
+ | |||
+ | The SGI Origin 200, code named Speedo, is a entry-level server computer developed and manufactured by SGI, introduced in October 1996 to accompany their mid-range and high-end Origin 2000. It is based on the same architecture as the Origin 2000 but has an unrelated hardware implementation. At the time of introduction, these systems ran the IRIX 6.4, and later, the IRIX 6.5 operating systems. The Origin 200 was discontinued on 30 June 2002. | ||
+ | |||
+ | |||
+ | = Architecture = | ||
+ | |||
+ | The Origin 200 consists of one or two modules. In configurations with two modules, the [[NUMAlink|NUMAlink 2]] (originally CrayLink) interconnection fabric is used to connect the two modules together. Using two modules, the Origin 200's capabilities (the number of processors, the amount of memory, etc.) is doubled. The Origin 200 and the Origin 200 GIGAchannel enclosures can be configured as a tower with "skins" that covered the bare metal for cosmetic purposes, or as a rackmountable enclosure compatible with 19- or 21-inch racks. | ||
+ | |||
+ | == Origin 200 module == | ||
+ | |||
+ | Each module contains a motherboard, seven 3.5-inch drive bays and two 5.25-inch drive bays. In configurations where an Origin 200 GIGAchannel expansion cabinet is used, the module also contains a Crosstown board that plugs into the motherboard. | ||
+ | |||
+ | === Motherboard === | ||
+ | |||
+ | The motherboard contains the Hub [[Application specific integrated circuit|ASIC]], a PCI bridge, two [[SCSI]] controllers, two UARTs and an Ethernet controller. The PCI bridge provides the PCI bus for the three [[PCI-X]] slots and the I/O controllers. | ||
+ | |||
+ | === Processor === | ||
+ | |||
+ | The processor(s) are located on a PIMM (Processor-Included Memory Module) that plugs into the motherboard. When first introduced, the Origin 200 supported one or two [[R10000]] processors with 1 or 4 MB L2 cache each. In August 1998, an upgraded PIMM featuring the 225 MHz R10000 processors was introduced. Later, 270 MHz [[R10000#R12000|R12000]] processors became available. The PIMMs come in two versions: single processor and dual processor. It is not possible to upgrade these systems to a dual processor system by using two single processor PIMMs, as there is only one PIMM connector on the motherboard. | ||
+ | |||
+ | === Memory === | ||
+ | |||
+ | The motherboard supports 32 MB to 2 GB of memory through eight [[DIMM]] slots organised into four banks. DIMMs with capacities of 16, 32, 64 and 256 MB are supported. DIMMs are installed in pairs. | ||
+ | |||
+ | == Origin 200 GIGAchannel == | ||
+ | |||
+ | The Origin 200 GIGAchannel is an expansion cabinet that connects to the Origin 200 modules via two [[XIO]] cables. It provides an additional four PCI-X slots and five XIO slots. The GIGAchannel contains a Crossbow (Xbow) ASIC, which is a eight-port [[crossbar]] provides the five datapaths to the five XIO slots and a single datapath to PCI bridge. The remaining two ports on the ASIC are connected to the XIO connectors used to interface the subsystem to the Origin 200 modules. | ||
+ | |||
+ | == Crosstown Bus and Graphics Options == | ||
+ | |||
+ | While SGI did not offer any graphics options for the Origin 200, it is possible to install an [[X-Town| XTOWN]] adapter in the GIGAchannel expansion cabinet. This allows an [[Onyx2]]-style [[InfiniteReality| Infinite Reality]] graphics sub-system to be connected to the Origin 200, creating what might be called an Onyx 200. Such a configuration has been developed by forum member [http://forums.nekochan.net/memberlist.php?mode=viewprofile&u=1542 bjornl] and documented in [http://forums.nekochan.net/viewtopic.php?f=3&t=16726704 this thread] in June of 2012. | ||
+ | |||
+ | |||
+ | = Hardware and Troubleshooting = | ||
+ | |||
+ | == Hardware Aggregator == | ||
+ | |||
+ | A number of expansion options were produced for the Origin 200. These may include the XIO MSCSI and MENET options that may be familiar from the [[Origin 2000]] or [[Octane]] systems, or any PCI/PCI-X option cards that are supported by [[IRIX]]. | ||
+ | |||
+ | |||
+ | == System Configurations == | ||
+ | |||
+ | This section will show typical configurations and unsupported configurations that nevertheless work and may be of interest to some readers. | ||
+ | |||
+ | === Single-cabinet, Dual-CPU O200 === | ||
+ | |||
+ | This is a representative example of an Origin 200 with several expansion options installed for additional network and SCSI interfaces. | ||
+ | |||
+ | <pre>Location: /hw/module/1/slot/MotherBoard/node | ||
+ | PIMM_225_2M_2P Board: barcode HTP839 part 013-2382-002 rev B | ||
+ | Location: /hw/module/1/slot/io7/xbox_dualxtown | ||
+ | XBOX_DUALXTOWN Board: barcode GKK426 part 030-1252-001 rev F | ||
+ | Location: /hw/module/1/slot/io1/MotherBoard | ||
+ | XBOX_EXT Board: barcode GRY731 part 030-1264-001 rev C | ||
+ | IP29 Board: barcode HTR389 part 030-1389-001 rev A | ||
+ | Location: /hw/module/1/slot/io1/MotherBoard/pci/2 | ||
+ | [missing info: page A data not available] Laser 000000c59e74 | ||
+ | Location: /hw/module/1/slot/io2/mscsi | ||
+ | MSCSI Board: barcode FTN041 part 030-1281-001 rev D | ||
+ | Location: /hw/module/1/slot/io3/menet | ||
+ | MENET Board: barcode GGF931 part 030-0873-003 rev G | ||
+ | Location: /hw/module/1/slot/io4/mscsi | ||
+ | MSCSI Board: barcode GGE344 part 030-1243-001 rev F | ||
+ | 2 225 MHZ IP27 Processors | ||
+ | CPU: MIPS R10000 Processor Chip Revision: 3.4 | ||
+ | FPU: MIPS R10010 Floating Point Chip Revision: 3.4 | ||
+ | CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled) | ||
+ | Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 | ||
+ | CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled) | ||
+ | Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 | ||
+ | Main memory size: 1152 Mbytes | ||
+ | Instruction cache size: 32 Kbytes | ||
+ | Data cache size: 32 Kbytes | ||
+ | Secondary unified instruction/data cache size: 2 Mbytes | ||
+ | Memory at Module 1/Slot 1: 1152 MB (enabled) | ||
+ | Bank 0 contains 128 MB (Standard) DIMMS (enabled) | ||
+ | Bank 1 contains 512 MB (Standard) DIMMS (enabled) | ||
+ | Bank 2 contains 512 MB (Standard) DIMMS (enabled) | ||
+ | Integral SCSI controller 2: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 9: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 11: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 10: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 1: Version QL1040B (rev. 2), single ended | ||
+ | CDROM: unit 6 on SCSI controller 1 | ||
+ | Integral SCSI controller 0: Version QL1040B (rev. 2), single ended | ||
+ | Disk drive: unit 1 on SCSI controller 0 (unit 1) | ||
+ | Disk drive: unit 2 on SCSI controller 0 (unit 2) | ||
+ | Integral SCSI controller 12: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 13: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 14: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 15: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 16: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 8: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 5: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 6: Version QL1040B (rev. 2), differential | ||
+ | Integral SCSI controller 7: Version QL1040B (rev. 2), differential | ||
+ | IOC3/IOC4 serial port: tty6 | ||
+ | IOC3/IOC4 serial port: tty1 | ||
+ | IOC3/IOC4 serial port: tty2 | ||
+ | IOC3/IOC4 serial port: tty7 | ||
+ | IOC3/IOC4 serial port: tty3 | ||
+ | IOC3/IOC4 serial port: tty4 | ||
+ | IOC3/IOC4 serial port: tty5 | ||
+ | IOC3/IOC4 serial port: tty8 | ||
+ | IOC3 parallel port: plp1 | ||
+ | Gigabit Ethernet: eg0, module 1, PCI slot 6, firmware version 12.4.10 | ||
+ | Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 | ||
+ | Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1 | ||
+ | Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0 | ||
+ | Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2 | ||
+ | Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3 | ||
+ | Origin PCI XIO board, module 1 slot 7: Revision 4 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 | ||
+ | Origin 200 base I/O, module 1 slot 1 | ||
+ | Origin MENET board, module 1 slot 3: Revision 3 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6 | ||
+ | PCI Adapter ID (vendor 0x1112, device 0x2200) PCI slot 7 | ||
+ | Origin MSCSI board, module 1 slot 2: Revision 3 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 | ||
+ | PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3 | ||
+ | Origin MSCSI board, module 1 slot 4: Revision 3 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 | ||
+ | PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 | ||
+ | IOC3/IOC4 external interrupts: 1 | ||
+ | HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled) | ||
+ | IP27prom in Module 1/Slot n1: Revision 6.150 | ||
+ | IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150 | ||
+ | </pre> | ||
+ | |||
+ | |||
+ | === Dual-Cabinet, Quad-CPU Onyx 200 === | ||
+ | |||
+ | <pre> | ||
+ | IRIS 2# hinv -vm | ||
+ | Location: /hw/module/1/slot/MotherBoard/node | ||
+ | PIMM_270_4M_2P Board: barcode KVJ031 part 013-2511-001 rev D | ||
+ | Location: /hw/module/1/slot/io7/xbox_dualxtown | ||
+ | XBOX_DUALXTOWN Board: barcode HLH794 part 030-1252-001 rev F | ||
+ | Location: /hw/module/1/slot/io1/MotherBoard | ||
+ | XBOX_EXT Board: barcode HJZ829 part 030-1264-001 rev C | ||
+ | IP29 Board: barcode KVJ192 part 030-1389-002 rev B | ||
+ | Location: /hw/module/1/slot/io1/MotherBoard/pci/2 | ||
+ | Location: /hw/module/1/slot/io2/fibre_channel | ||
+ | FIBRE_CHANNEL Board: barcode HPB024 part 030-0927-003 rev C | ||
+ | Location: /hw/module/1/slot/io6/kona | ||
+ | GE14-4 Board: barcode GKL909 part 030-1129-002 rev H | ||
+ | KTOWN Board: barcode FTF047 part 030-1067-001 rev F | ||
+ | Location: /hw/module/2/slot/MotherBoard/node | ||
+ | PIMM_270_4M_2P Board: barcode KBW649 part 013-2511-001 rev D | ||
+ | Location: /hw/module/2/slot/MotherBoard/node/xtalk/8 | ||
+ | IP29 Board: barcode KVG280 part 030-1389-002 rev B | ||
+ | Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2 | ||
+ | 4 270 MHZ IP27 Processors | ||
+ | CPU: MIPS R12000 Processor Chip Revision: 2.3 | ||
+ | FPU: MIPS R12010 Floating Point Chip Revision: 2.3 | ||
+ | CPU 0 at Module 1/Slot 1/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) | ||
+ | Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 | ||
+ | CPU 1 at Module 1/Slot 1/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) | ||
+ | Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 | ||
+ | CPU 2 at Module 2/Slot 2/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) | ||
+ | Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 | ||
+ | CPU 3 at Module 2/Slot 2/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) | ||
+ | Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 | ||
+ | Main memory size: 1536Mbytes | ||
+ | Instruction cache size: 32 Kbytes | ||
+ | Data cache size: 32 Kbytes | ||
+ | Secondary unified instruction/data cache size: 4 Mbytes | ||
+ | Memory at Module 1/Slot 1: 768 MB (enabled) | ||
+ | Bank 0 contains 256 MB (Standard) DIMMS (enabled) | ||
+ | Bank 1 contains 256 MB (Standard) DIMMS (enabled) | ||
+ | Bank 2 contains 128 MB (Standard) DIMMS (enabled) | ||
+ | Bank 3 contains 128 MB (Standard) DIMMS (enabled) | ||
+ | Memory at Module 2/Slot 2: 768 MB (enabled) | ||
+ | Bank 0 contains 256 MB (Standard) DIMMS (enabled) | ||
+ | Bank 1 contains 256 MB (Standard) DIMMS (enabled) | ||
+ | Bank 2 contains 128 MB (Standard) DIMMS (enabled) | ||
+ | Bank 3 contains 128 MB (Standard) DIMMS (enabled) | ||
+ | Integral SCSI controller 6: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 0: Version QL1040B (rev. 2), single ended | ||
+ | Disk drive: unit 1 on SCSI controller 0 (unit 1) | ||
+ | Integral SCSI controller 1: Version QL1040B (rev. 2), single ended | ||
+ | CDROM: unit 1 on SCSI controller 1 | ||
+ | Tape drive: unit 7 on SCSI controller 1: DAT | ||
+ | Integral SCSI controller 2: Version Fibre Channel QL2200A | ||
+ | Integral SCSI controller 3: Version Fibre Channel QL2200A | ||
+ | Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2 | ||
+ | Integral SCSI controller 7: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 8: Version QL1040B (rev. 2), single ended | ||
+ | Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2 | ||
+ | IOC3 serial port: tty1 | ||
+ | IOC3 serial port: tty2 | ||
+ | IOC3 serial port: tty3 | ||
+ | IOC3 serial port: tty4 | ||
+ | IOC3 parallel port: plp1 | ||
+ | IOC3 parallel port: plp2 | ||
+ | Graphics board: InfiniteReality2 | ||
+ | Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 | ||
+ | Gigabit Ethernet: eg0, module 1, PCI slot 5, firmware version 0.0.0 | ||
+ | Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2 | ||
+ | Origin 200 base I/O, module 2 slot 2 | ||
+ | Origin PCI XIO board, module 1 slot 7: Revision 4 | ||
+ | PCI Adapter ID (vendor 4265, device 3) pci slot 2 | ||
+ | PCI Adapter ID (vendor 4215, device 4128) pci slot 0 | ||
+ | PCI Adapter ID (vendor 4215, device 4128) pci slot 1 | ||
+ | PCI Adapter ID (vendor 4370, device 8704) pci slot 5 | ||
+ | PCI Adapter ID (vendor 4215, device 4128) pci slot 7 | ||
+ | Origin 200 base I/O, module 1 slot 1 | ||
+ | PCI Adapter ID (vendor 4265, device 3) pci slot 2 | ||
+ | PCI Adapter ID (vendor 4215, device 4128) pci slot 0 | ||
+ | PCI Adapter ID (vendor 4215, device 4128) pci slot 1 | ||
+ | PCI Adapter ID (vendor 4265, device 9) pci slot 5 | ||
+ | PCI Adapter ID (vendor 4215, device 8704) pci slot 6 | ||
+ | PCI Adapter ID (vendor 4215, device 8704) pci slot 7 | ||
+ | Origin FIBRE CHANNEL board, module 1 slot 2: Revision 4 | ||
+ | PCI Adapter ID (vendor 36868, device 4448) pci slot 0 | ||
+ | PCI Adapter ID (vendor 36868, device 4448) pci slot 1 | ||
+ | IOC3 external interrupts: 1 | ||
+ | IOC3 external interrupts: 2 | ||
+ | HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled) | ||
+ | HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled) | ||
+ | IP27prom in Module 1/Slot n1: Revision 6.156 | ||
+ | IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156 | ||
+ | IP27prom in Module 2/Slot n2: Revision 6.156 | ||
+ | </pre> | ||
+ | |||
+ | |||
+ | == Troubleshooting == | ||
+ | |||
+ | === Origin 200 Status LEDs === | ||
+ | |||
+ | {{:Origin200_Status_LEDs}} | ||
+ | |||
+ | |||
+ | = References = | ||
+ | |||
+ | |||
+ | == External Links == | ||
+ | |||
+ | * [http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?coll=0650&db=bks&fname=/SGI_Admin/Origin200_MG/front.html Origin 200 and Origin 200 GIGAchannel Maintenance Guide (document number: 007-3709-002)] | ||
+ | * [http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?coll=hdwr&db=bks&fname=/SGI_Admin/Origin200_OG/front.html Origin200 and Origin200 GIGAchannel Owner's Guide (document number: 007-3708-002)] | ||
+ | |||
+ | * [http://www.cbronline.com/news/silicon_graphics_completely_renews_its_stations_servers "SILICON GRAPHICS COMPLETELY RENEWS ITS STATIONS, SERVERS"]. (7 October 1996). ''Computer Business Review''. | ||
+ | * [http://www.cbronline.com/news/sgi_thinks_it_has_answer_to_bus_bandwidth_limits "SGI THINKS IT HAS ANSWER TO BUS BANDWIDTH LIMITS"]. (21 October 1996). ''Computer Business Review''. | ||
+ | |||
+ | |||
== Manuals == | == Manuals == | ||
* [https://cdn.preterhuman.net/texts/computing/sgi/007-3415-003.pdf 007-3415-003] - Origin200 Owner’s Guide | * [https://cdn.preterhuman.net/texts/computing/sgi/007-3415-003.pdf 007-3415-003] - Origin200 Owner’s Guide |
Revision as of 15:20, 16 September 2018
Introduction
The SGI Origin 200, code named Speedo, is a entry-level server computer developed and manufactured by SGI, introduced in October 1996 to accompany their mid-range and high-end Origin 2000. It is based on the same architecture as the Origin 2000 but has an unrelated hardware implementation. At the time of introduction, these systems ran the IRIX 6.4, and later, the IRIX 6.5 operating systems. The Origin 200 was discontinued on 30 June 2002.
Architecture
The Origin 200 consists of one or two modules. In configurations with two modules, the NUMAlink 2 (originally CrayLink) interconnection fabric is used to connect the two modules together. Using two modules, the Origin 200's capabilities (the number of processors, the amount of memory, etc.) is doubled. The Origin 200 and the Origin 200 GIGAchannel enclosures can be configured as a tower with "skins" that covered the bare metal for cosmetic purposes, or as a rackmountable enclosure compatible with 19- or 21-inch racks.
Origin 200 module
Each module contains a motherboard, seven 3.5-inch drive bays and two 5.25-inch drive bays. In configurations where an Origin 200 GIGAchannel expansion cabinet is used, the module also contains a Crosstown board that plugs into the motherboard.
Motherboard
The motherboard contains the Hub ASIC, a PCI bridge, two SCSI controllers, two UARTs and an Ethernet controller. The PCI bridge provides the PCI bus for the three PCI-X slots and the I/O controllers.
Processor
The processor(s) are located on a PIMM (Processor-Included Memory Module) that plugs into the motherboard. When first introduced, the Origin 200 supported one or two R10000 processors with 1 or 4 MB L2 cache each. In August 1998, an upgraded PIMM featuring the 225 MHz R10000 processors was introduced. Later, 270 MHz R12000 processors became available. The PIMMs come in two versions: single processor and dual processor. It is not possible to upgrade these systems to a dual processor system by using two single processor PIMMs, as there is only one PIMM connector on the motherboard.
Memory
The motherboard supports 32 MB to 2 GB of memory through eight DIMM slots organised into four banks. DIMMs with capacities of 16, 32, 64 and 256 MB are supported. DIMMs are installed in pairs.
Origin 200 GIGAchannel
The Origin 200 GIGAchannel is an expansion cabinet that connects to the Origin 200 modules via two XIO cables. It provides an additional four PCI-X slots and five XIO slots. The GIGAchannel contains a Crossbow (Xbow) ASIC, which is a eight-port crossbar provides the five datapaths to the five XIO slots and a single datapath to PCI bridge. The remaining two ports on the ASIC are connected to the XIO connectors used to interface the subsystem to the Origin 200 modules.
Crosstown Bus and Graphics Options
While SGI did not offer any graphics options for the Origin 200, it is possible to install an XTOWN adapter in the GIGAchannel expansion cabinet. This allows an Onyx2-style Infinite Reality graphics sub-system to be connected to the Origin 200, creating what might be called an Onyx 200. Such a configuration has been developed by forum member bjornl and documented in this thread in June of 2012.
Hardware and Troubleshooting
Hardware Aggregator
A number of expansion options were produced for the Origin 200. These may include the XIO MSCSI and MENET options that may be familiar from the Origin 2000 or Octane systems, or any PCI/PCI-X option cards that are supported by IRIX.
System Configurations
This section will show typical configurations and unsupported configurations that nevertheless work and may be of interest to some readers.
Single-cabinet, Dual-CPU O200
This is a representative example of an Origin 200 with several expansion options installed for additional network and SCSI interfaces.
Location: /hw/module/1/slot/MotherBoard/node PIMM_225_2M_2P Board: barcode HTP839 part 013-2382-002 rev B Location: /hw/module/1/slot/io7/xbox_dualxtown XBOX_DUALXTOWN Board: barcode GKK426 part 030-1252-001 rev F Location: /hw/module/1/slot/io1/MotherBoard XBOX_EXT Board: barcode GRY731 part 030-1264-001 rev C IP29 Board: barcode HTR389 part 030-1389-001 rev A Location: /hw/module/1/slot/io1/MotherBoard/pci/2 [missing info: page A data not available] Laser 000000c59e74 Location: /hw/module/1/slot/io2/mscsi MSCSI Board: barcode FTN041 part 030-1281-001 rev D Location: /hw/module/1/slot/io3/menet MENET Board: barcode GGF931 part 030-0873-003 rev G Location: /hw/module/1/slot/io4/mscsi MSCSI Board: barcode GGE344 part 030-1243-001 rev F 2 225 MHZ IP27 Processors CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 3.4 CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 Main memory size: 1152 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 2 Mbytes Memory at Module 1/Slot 1: 1152 MB (enabled) Bank 0 contains 128 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Integral SCSI controller 2: Version QL1040B (rev. 2), single ended Integral SCSI controller 9: Version QL1040B (rev. 2), single ended Integral SCSI controller 11: Version QL1040B (rev. 2), differential Integral SCSI controller 10: Version QL1040B (rev. 2), single ended Integral SCSI controller 1: Version QL1040B (rev. 2), single ended CDROM: unit 6 on SCSI controller 1 Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 2 on SCSI controller 0 (unit 2) Integral SCSI controller 12: Version QL1040B (rev. 2), single ended Integral SCSI controller 13: Version QL1040B (rev. 2), differential Integral SCSI controller 14: Version QL1040B (rev. 2), differential Integral SCSI controller 15: Version QL1040B (rev. 2), differential Integral SCSI controller 16: Version QL1040B (rev. 2), differential Integral SCSI controller 8: Version QL1040B (rev. 2), differential Integral SCSI controller 5: Version QL1040B (rev. 2), differential Integral SCSI controller 6: Version QL1040B (rev. 2), differential Integral SCSI controller 7: Version QL1040B (rev. 2), differential IOC3/IOC4 serial port: tty6 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty7 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3/IOC4 serial port: tty5 IOC3/IOC4 serial port: tty8 IOC3 parallel port: plp1 Gigabit Ethernet: eg0, module 1, PCI slot 6, firmware version 12.4.10 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1 Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0 Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2 Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3 Origin PCI XIO board, module 1 slot 7: Revision 4 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 Origin 200 base I/O, module 1 slot 1 Origin MENET board, module 1 slot 3: Revision 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5 PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6 PCI Adapter ID (vendor 0x1112, device 0x2200) PCI slot 7 Origin MSCSI board, module 1 slot 2: Revision 3 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3 Origin MSCSI board, module 1 slot 4: Revision 3 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.150 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150
Dual-Cabinet, Quad-CPU Onyx 200
IRIS 2# hinv -vm Location: /hw/module/1/slot/MotherBoard/node PIMM_270_4M_2P Board: barcode KVJ031 part 013-2511-001 rev D Location: /hw/module/1/slot/io7/xbox_dualxtown XBOX_DUALXTOWN Board: barcode HLH794 part 030-1252-001 rev F Location: /hw/module/1/slot/io1/MotherBoard XBOX_EXT Board: barcode HJZ829 part 030-1264-001 rev C IP29 Board: barcode KVJ192 part 030-1389-002 rev B Location: /hw/module/1/slot/io1/MotherBoard/pci/2 Location: /hw/module/1/slot/io2/fibre_channel FIBRE_CHANNEL Board: barcode HPB024 part 030-0927-003 rev C Location: /hw/module/1/slot/io6/kona GE14-4 Board: barcode GKL909 part 030-1129-002 rev H KTOWN Board: barcode FTF047 part 030-1067-001 rev F Location: /hw/module/2/slot/MotherBoard/node PIMM_270_4M_2P Board: barcode KBW649 part 013-2511-001 rev D Location: /hw/module/2/slot/MotherBoard/node/xtalk/8 IP29 Board: barcode KVG280 part 030-1389-002 rev B Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2 4 270 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 2.3 FPU: MIPS R12010 Floating Point Chip Revision: 2.3 CPU 0 at Module 1/Slot 1/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 CPU 1 at Module 1/Slot 1/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 CPU 2 at Module 2/Slot 2/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 CPU 3 at Module 2/Slot 2/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz Tap 0x9 Main memory size: 1536Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Memory at Module 1/Slot 1: 768 MB (enabled) Bank 0 contains 256 MB (Standard) DIMMS (enabled) Bank 1 contains 256 MB (Standard) DIMMS (enabled) Bank 2 contains 128 MB (Standard) DIMMS (enabled) Bank 3 contains 128 MB (Standard) DIMMS (enabled) Memory at Module 2/Slot 2: 768 MB (enabled) Bank 0 contains 256 MB (Standard) DIMMS (enabled) Bank 1 contains 256 MB (Standard) DIMMS (enabled) Bank 2 contains 128 MB (Standard) DIMMS (enabled) Bank 3 contains 128 MB (Standard) DIMMS (enabled) Integral SCSI controller 6: Version QL1040B (rev. 2), single ended Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Integral SCSI controller 1: Version QL1040B (rev. 2), single ended CDROM: unit 1 on SCSI controller 1 Tape drive: unit 7 on SCSI controller 1: DAT Integral SCSI controller 2: Version Fibre Channel QL2200A Integral SCSI controller 3: Version Fibre Channel QL2200A Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2 Integral SCSI controller 7: Version QL1040B (rev. 2), single ended Integral SCSI controller 8: Version QL1040B (rev. 2), single ended Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2 IOC3 serial port: tty1 IOC3 serial port: tty2 IOC3 serial port: tty3 IOC3 serial port: tty4 IOC3 parallel port: plp1 IOC3 parallel port: plp2 Graphics board: InfiniteReality2 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Gigabit Ethernet: eg0, module 1, PCI slot 5, firmware version 0.0.0 Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2 Origin 200 base I/O, module 2 slot 2 Origin PCI XIO board, module 1 slot 7: Revision 4 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4215, device 4128) pci slot 0 PCI Adapter ID (vendor 4215, device 4128) pci slot 1 PCI Adapter ID (vendor 4370, device 8704) pci slot 5 PCI Adapter ID (vendor 4215, device 4128) pci slot 7 Origin 200 base I/O, module 1 slot 1 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4215, device 4128) pci slot 0 PCI Adapter ID (vendor 4215, device 4128) pci slot 1 PCI Adapter ID (vendor 4265, device 9) pci slot 5 PCI Adapter ID (vendor 4215, device 8704) pci slot 6 PCI Adapter ID (vendor 4215, device 8704) pci slot 7 Origin FIBRE CHANNEL board, module 1 slot 2: Revision 4 PCI Adapter ID (vendor 36868, device 4448) pci slot 0 PCI Adapter ID (vendor 36868, device 4448) pci slot 1 IOC3 external interrupts: 1 IOC3 external interrupts: 2 HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled) HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.156 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156 IP27prom in Module 2/Slot n2: Revision 6.156
Troubleshooting
Origin 200 Status LEDs
Colours | Meaning |
---|---|
Red briefly, then amber, then green, then off (about 1/2 second per color) | If you have just turned on the master power switch, this indicates the system controller is OK. |
Green, blinking | The system is booting. |
Green on solid | The system is on. |
Amber, blinking | Normal power-off sequence. N/A |
Amber on solid | One of the fans has failed. Replace the fan. |
Red, blinking (during power-off sequence) | A problem with the power supply was detected. |
Red, blinking (followed by system shutdown) | The system temperature is too high, and the server is shutting down. |
Red on solid (followed by system shutdown) | The system became too hot. The power supply failed during booting. |
Blinks green three times, then blinks red once, and then O200 turns off. | Bad Power Supply Voltages. |
References
External Links
- Origin 200 and Origin 200 GIGAchannel Maintenance Guide (document number: 007-3709-002)
- Origin200 and Origin200 GIGAchannel Owner's Guide (document number: 007-3708-002)
- "SILICON GRAPHICS COMPLETELY RENEWS ITS STATIONS, SERVERS". (7 October 1996). Computer Business Review.
- "SGI THINKS IT HAS ANSWER TO BUS BANDWIDTH LIMITS". (21 October 1996). Computer Business Review.
Manuals
- 007-3415-003 - Origin200 Owner’s Guide