SGI Visual Workstation
The SGI Visual Workstation series was a line of computer workstations manufactured by SGI and designed to run Windows NT and Linux. The Visual Workstations are notable for their use of the Intel Pentium II and Intel Pentium III processors (rather than the 64-bit MIPS RISC architecture usually used in SGI computer products), as well as for the unique departures from the standard IBM AT-derived architecture from which the great majority of Intel 386-based computers—for example, unlike virtually all other Intel Pentium-class systems, the Visual Workstations did not include a BIOS (often criticized as hackish and obsolete), in favor of a port of the same powerful ARCS firmware system used in all other contemporary SGI workstations.
The Visual Workstations 320/540, although they used Intel processors, more closely resembled the SGI O2 than other Intel-based systems, in terms of computer architecture. Among other similarities, both the O2 and the Visual Workstations employed unified Memory Architecture memory systems. The later 230/330/550 workstations standard IBM PC compatible computers.
The Visual Workstations 320/540 shipped with Microsoft Windows NT 4.0, and thanks to the custom Hardware Abstraction Layer (HAL), could run any software written for Windows NT on Intel processors, and so was not the disaster that happened in the non-PC compatible DOS computer days. SGI also began shipping Visual Workstations preconfigured with release 6.2 of the Red Hat Linux distribution. These systems have the letter "L" appended to their model numbers.
However, the enhancements which differentiated the Visual Workstations over standard Intel machines necessitated a custom Hardware Abstraction Layer (HAL) for Windows, and Windows 2000 was the last release which included the required SGI-specific HAL. The HAL was removed during Windows XP development, it is still present in some of the first 'Whistler' betas. Because of that, and because SGI ceased supporting the Visual Workstation 320/540 installation of future Windows versions is unsupported.
Because of the various SGI enhancements, Visual Workstations often out-performed Intel Personal computers of similar configuration in graphically-intensive or memory bound applications. However due to the hefty upgrade costs for the non-standard components it was more cost effective to purchase an entire new higher-spec'd non-SGI PC rather than purchase upgrades to a Visual Workstation.
The SGI 320 and 540 models shipped with the optional 1600SW TFT display. This flat panel runs at a SuperWide resolution of 1600 x 1024 pixels at 60Hz in 24-bit colour and 110 dpi. The display won 16 international awards and despite its age, it still compares well to modern displays produced nearly a decade later.
The 1600SW uses the OpenLDI standard, rather than DVI or VGA, and will only run from the SGI 320/540 or SGI O2 with flat panel adapter. Other cards are also capable of running the 1600SW, including the Number Nine Revolution IV. SGI later produced a Multilink Adapter to allow the 1600SW to be used with a DVI or VGA card capable of running at a resolution of 1600 x 1024. SGI refers to such hardware as Super Wide Savvy.
Models and configurations
The model numbers of the Visual Workstations:
- Visual Workstation 320 - Dual processor Pentium II/III (Slot1) Cobalt chipset
- Visual Workstation 540 - Quad processor Pentium II/III Xeon (Slot2) Cobalt chipset
- Visual Workstation 230
- Single processor Pentium III (FCPGA Socket 370)
- VIA Apollo Pro 133A, Acer M23D motherboard (used also in Acer Altos 350)
- offered with VPro V3 (GeForce 256), VR3 (Quadro) or V7 (Quadro2 MXR) graphics or a Matrox Millenium G450
- Visual Workstation 330/330L
- Dual processor Pentium II/III (FCPGA Socket 370)
- VIA Apollo Pro 133A, Acer M25D motherboard (used also in Acer Altos 600, also available as AOpen DX34 Plus)
- offered with VPro V3 (GeForce 256), VR3 (Quadro), V7 (Quadro2 MXR) or VR7 (Quadro2 Pro) graphics
- Visual Workstation 550/550L
- Dual processor Pentium III Xeon (Slot 2)
- Intel i840, Acer M29A motherboard
- offered with VPro VR3 (Quadro) or VR7 (Quadro2 Pro) graphics
- Visual Workstation 750
- Itanium workstation based on Intel's reference design (same as Dell Precision WorkStation 730, IBM IntelliStation Z Type 6894, HP i2000, Fujitsu-Siemens CELSIUS 880)
- Visual Workstation Zx10 (Bought from Intergraph)
- Dual processor Pentium III (FCPGA Socket 370)
- ServerWorks ServerSet III HE (with MADP memory controller), Tyan Thunder 2500 motherboard
- offered with Wildcat 4110 VIO, Wildcat 4210, Wildcat 4210 VIO, Wildcat II 5110, VR7
Visual Workstations were initially equipped with either a single Pentium II or Pentium III processor or dual (SMP) Pentium III processors. The 540 and 550 models supported the Xeon implementation of the Pentium series, and could support up to four Xeons in an SMP configuration. The systems include PCI expansion slots. Although no SGI Visual Workstation was ever released with processors running faster than 700 MHz, some hobbyists have been able to run processors up to a single 1.4 GHz Celeron (100 MHz FSB) or dual 1 GHz Pentium III CPUs (100 MHz FSB) with appropriate upgrades to the ARCS PROM.
Later systems (230, 330, and 550 models) were not based on the original Visual Workstation UMA architecture (cobalt chipset), but rather on VIA Technologies (230 and 330) or Intel 840 (550) chipsets. These systems used socketed 133MHz-bus Intel Pentium 3 CPUs, complete with generic PC BIOS, generic PC memory (RDRAM in the 550), and other non-differentiated parts. The "L" denotes a system that shipped pre-installed with Linux as opposed to Windows. **
Visual Workstation 230
To revert the system to its factory state you have to:
- Install Red Hat 6.2
- Install SGI ProPack for Linux 1.3 Visual Workstation Edition (run install_vwe not install or you will end up with a partial installation, later ProPacks are not working with the VW230)
Linux with more than 768 MB RAM and nVidia graphics
If you have more than 768 MB RAM the nVidia graphics driver from the ProPack will crash. If you can't remove the memory module you should add a parameter to boot LILO.
The Visual Workstation 230 uses a standard ATX PSU made by Delta, model DPS-300BB. If you need to change it you should make sure there are no protruding elements at the back of the PSU which would interfere with the back of the case - the PSU is covered by it on both sides and some PSUs with protruding sockets will not fit.
Common Visual Workstation 320 and 540 topics
Installing Windows 2000
Because SGI didn't release Windows 2000 for the Visual Workstation, you will have to use your own installation media - any retail copy should work. Installing Windows 2000 is pretty straightforward. You have to power on your 540, press two times ESC to go to the PROM menu and choose the option to install the OS. You might want to use the PROM's partitioning program to setup 2 partitions: one system partition and one boot partition (just launch it and run with the default values it displays). After Windows 2000 setup launches it should just work without further customization - it will choose the correct HAL and install the drivers.
After installation you should start with Silicon Graphics 320/540 Supplemental Software Kit for Windows 2000 (SSK) (sgi_ssk.exe or sgi_ssk_jpn.exe for the Japanese version). It contains software which adds sound, video and color settings to the Control Panel. If you have an old PROM it will upgrade it to 1.1004. This package also contains the document ssk_relnotes.rtf which you might want to read before installing Windows 2000 - it explains what things won't work in the new OS.
The SSK will install video and media drivers version 5.10. There are newer drivers available. SGICoGraphics524w2k.exe will upgrade video drivers to version 5.24 and SGIDMediaSW522w2k.exe upgrades media drivers to 5.22. The latest PROM is 1.1005 and PROM1_1005.exe will allow you to create a PROM upgrade floppy. All these packages are available via the free Supportfolio account - just search for 540 and make sure you have set the search start date to some day in 1999.
After installing the SGI software you might notice in Windows' Device Manager a yellow exclamation mark on sglfb - this was the Microsoft's driver for Cobalt. You can safely remove this device - because of the VW's architecture the SGIs Cobalt driver appears as 'sgcomp' under "Non plug and play devices". You have to enable "show hidden devices" in the View menu to see it.
Also see more specific instructions in Installing Windows 2000 On SGI 320.
Only OpenGL accelerated 3D graphics is supported. Cobalt drivers won't accelerate Direct3D, only DirectDraw acceleration is provided.
Windows XP beta on a Visual Workstation
Visual Workstation support was dropped from Windows XP during its development. The following Windows XP beta (codename "Whistler") builds contain the required HALBORG.DLL:
Compatible PCI cards for 320
Below is a list of compatible PCI cards that have either been reported as working on the 320 or are designated as 3.3 volt cards.
- Adaptec 19160 - Ultra160 SCSI
- Adaptec 29160N - Ultra160 SCSI
- Adaptec 29160 - Ultra160 SCSI
- Adaptec 39160 - Ultra160 SCSI
- Adaptec 2930U2 - Ultra160 SCSI
- Adaptec 2940UW Pro - Ultra160 SCSI
- Adaptec 3940UWD - Ultra160 SCSI
- Adaptec 3950U2 - Ultra160 SCSI
- Adaptec 3950U2W - Ultra160 SCSI
- Adaptec3950U2B - Ultra160 SCSI
- QLogic 1080 - Ultra2 LVD (SGI320 bootable)
- QLogic 1280 - Dual Ultra2 LVD (SGI320 bootable)
- Symbios Logic SCSI UW
- Inito INI-A100 U2W
- EPOX EP-DR02P3 UDMA100 IDE RAID (cannot 'see' drives before booting Windows)
- Escalade 7210 2-way RAID (cannot 'see' drives before booting Windows)
- Mylex RAID Controller (DAC1164P)
- QLogic 2100F Fibre card
- Promise FastTrack TX2
- Promise FastTrak TX2000
Video cards (for 2nd monitor under W2000)
- Creative Labs 3D Blaster
- ELSA Erazor II
- ELSA Synergy II
- ELSA GLoria Synergy
- Voodoo 3000
- Diamond FireGL1000Pro
- Matrox G450 (useful for a 3-monitor setup under W2000)
- Appian Jeronimo Pro Dual Head (useful for a 3-monitor setup under W2000)
- Silicon Graphics® DA1100 (digital audio card)
- Creative Labs Ensoniq
- Creative Labs SoundBlaster Live
- Turtle Beach Montego II
- Antex Studio AV
Firewire & USB
- Silicon Graphics® Firewire/SCSI card - Only available to Japanese customers
- Adaptec USB2 / Firewire Duoconnect - DO NOT INSTALL ADAPTEC DRIVERS
- Belkin 5-port USB2 Hi-Speed
- Digital Origin 1394 (SGI firewire replacement card)
- Orange Micro OrangeLink (1394 + USB) - Universal Version Only
- Orange Micro OrangeLink (1394 + USB2.0) - Universal Version Only
- Alteon WebSystems Gigabit Ethernet (2 BNC connectors only)
- Compaq PCI 10/100 NIC W/TX
- Compaq 3131 - Fast Fthernet nics, dual 10/100
- D-Link FE-530TX+ Ethernet
- D-Link DWL-520 (wireless adapter)
- HP 10/100VG Lan Adapter
- HP 5185 - 6408 Ethernet
- Interphase 5575 ATM card (must be in 1st slot)
- Linksys Wireless-G (model WMP54G)
- Packet Engines G-NIC Gigabit
- Creative Labs Modem Blaster Di5630-4
- Diamond Supra Max 56K
- Radicom 56K
- REALmagic Xcard™
- Harmonix ISDN P30
- DVS Clipstation PRO D1
- DPS Reality
- DPS Perception
- MPEG Encoder (VisonTech)
- BROADWAY 2.5 video capture card
- Midiman Midisport 2x2 (USB-midi interface)
Visual Workstation 540
Compatible Pentium III Xeon Processors at 700 and 900 MHz
The Visual Workstation 540 is compatible with Pentium III Xeons which run either at 2.0V or 2.8V with 100 MHz bus speed. It won't work with 5/12V CPUs and 133 MHz Xeons might work at reduced speed or not work at all. Here's a table with CPUs which should work:
|S/Q Spec||Stepping||Clock MHz||L2 Cache||Channel|
- BOX - boxed processor with attached passive heatsing
- OEM - OEM processor, not all heatsinks will fit or provide optimal cooling in a Visual Workstation 540
- ES - Engineering Sample, not all heatsinks will fit or provide optimal cooling in a Visual Workstation 540
Ideally, when multiprocessing, all CPUs should have the same S-Spec code. Usually equal stepping is enough, but some 700 MHz Pentium III Xeons won't work together because of different AGTL+ signaling. Refer to the Intel Pentium III Xeon Processor Specification Update (Order number: 244460-043), chapter "Mixed Steppings in MP Systems" before you try to run CPUs with different S-Spec codes.
The "Owner's Guide" contains some information about how to diagnose a Visual Workstation 540 when it's not booting, but it's not always accurate. Diagnosing the system is based on the blinking LED on the front of the Visual Workstation - the "Owner's Guide" in Chapter 8 contains most information on how to interpret these, but there are things you should know:
- Just after starting the LED will blink twice for every populated memory group. This is not the "continous blinking" memory error code the Guide talks about, it's just information that memory is present. After that the LED blinks twice very fast and this is the moment the diagnostic blinks start to appear if there's something wrong.
- If the LED isn't blinking after the startup blinks you might want to reseat the CPUs and clean their connector's.
A cheap PCI diagnostic card will also work. I'm using one which displays 4 characters and these are the codes i've seen:
- --FF - no primary CPU installed.
- C0CC - problem with CPU - reseating it helped.
- The Unofficial SGI320 Website @archive.org mirror
- SGI legacy page for Intel based systems
- SGI site for Linux on i386 (including Visual Workstation boot floppies)
- SGI Visual Workstation information page
- Linux for SGI Visual Workstations
- Installing dual 1 GHz Pentium III (100 MHz FSB) CPUs
- 007-4278-001 - Silicon Graphics 330 Visual Workstation User’s Guide
- 007-4279-001 - Silicon Graphics 550 Visual Workstation User’s Guide
- 007-4327-002 - Silicon Graphics Zx10 Visual Workstation Owner’s Guide
- 007-4328-002 - Silicon Graphics Zx10 5U Rackmount Owner’s Guide
- 007-4329-002 - Silicon Graphics Zx10 6U Rackmount/Deskside Owner’s Guide
- 007-4330-002 - Silicon Graphics Zx10 System Board Guide