Please consider a donation to the Higher Intellect project. See https://preterhuman.net/donate.php or the Donate to Higher Intellect page for more info. |
V8
For now see VPro wiki topic.
IRIX support
Support for the V6 and V8 first appeared in IRIX 6.5.8.
V6/V8 Pixel Clock Issues
The first generation of VPro boards (V6 & V8) have a design flaw that prohibits graphics modes in much of what might otherwise be considered the normal range for SGI desktop systems:
- Modes in the 109-193MHz range cannot be selected at all on V6/V8.
- Modes that are close to the lower end of that range (like 1280x1024_59/60) are only allowed at 8 bytes/pixel framebuffer size and even at that setting some people reported display problems (noise, flickering).
This limits the ability of the V6 and V8 to use a number of common display resolutions, a situation that can be at least partially over come with the use of reduced blanking. As an example, a CVT-generated 1600x900@60Hz modeline without reduced blanking would have a Pixel Clock of 118.25MHz, which falls in the unusable 109-193MHz Pixel Clock range, while a modeline with reduced blanking would have a Pixel Clock of only 97.75MHz, which could be used by V6 or V8 graphics boards.